Radio Shack PDWM-2600 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PDWM-2600
www.pyleaudio.com

ملخص المحتوى في الصفحة رقم 2

RECEIVER UNIT/operation PDWM-2600 Avoid exposure of the system to rain or moisture. No user-serviceable parts inside the system. Refer all servicing to a qua- PDWM-2600 DUAL UHF WIRELESS MICROPH0NE SYSTEM lified technician only. DUAL UHF WIRELESS MICROPH0NE SYSTEM OPERATION MANUAL Handle the microphone carefully, dropping or other shocks may cause failure. Thanks for your support and trust to us while choosing our wireless Avoid using the system where it may be subjected to heat, s

ملخص المحتوى في الصفحة رقم 3

HANDHELD MICROPHONE/DIAGRAM INSTALLATION To connect the wireless microphone to your amplifier system: Refer to the installation diagram below. UNSCREW BATTERY Using the supplied jack-to-jack lead, connect from the AF OUT jack COVER TO INSERT socket to the MICROPHONE INPUT socket on your amplifier. Plug BATTERY the mains power adapter into a suitable mains socket, and plug the lead connector into the DC 12V input socket. AMPLIFIER With voltage selector switch for selecting a suitab

ملخص المحتوى في الصفحة رقم 4

TROUBLE SHOOTING SPECIFICATIONS Please read and check the following points before asking for service. A. OVERALL SYSTEM The wireless microphone fails to work: Quartz controlled 1. Oscillation mode: 2. Carrier Frequency Range: UHF690-960MHz check the microphone battery by switching the microphone ON, the red LED battery condition indicator should +/-0.005% 3. Stability: +/-56KHz with level limiting come on for a second and then go off. If the red LED stays on or is dim, replace the battery. If