Knoll Systems IR100 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IR100 Infrared Receiver Specifications:
IR100

Tabletop Infrared Receiver
Specifications
Installation Instructions v1.3
Infrared carrier frequency: 30-60kHz

Indoor reception range: 20-25 feet (6-8 meters)
Warning: To be installed and/or used in accordance with
Nominal reception angle: 50 degrees off axis
appropriate electrical codes and regulations.
Maximum wire length: 1000’ (300m) or even more with

larger gauge wire
Introduction: Thank you for your purchase of a Knoll I

ملخص المحتوى في الصفحة رقم 2

3. Wires can be solid or stranded, shielded or unshielded with a 7. IF using the RJ45/cat5 connection only you can connect minimum of 28-gauge for runs under 200’, 22-gauge for runs the positive of a second 5-20 VDC power supply to the pin 5 under 500’ and 20-gauge for runs up to 1000’. Wires can be labeled STAT. Connect that power supply ground to pin 3 looped from IR100 to IR100 or home run. Home runs normally GROUND and plug the power supply into the switched outlet of offer more reliabil