Audio-Technica U853PM دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DISTANCE “X”
LESS THAN 2 TIMES “X”
U853PM & U853PMW
®
unipoint microphones
Cardioid Condenser Hanging Microphones
Installation and Operation
The U853PM requires 11V to 52V phantom power for operation.
A uniform 120° angle of acceptance provides well-balanced audio pickup. The
microphone should be located forward of the front-most source, above the
rear-most source, and “aimed” between them (Fig.1). Increasing the height of
the mic above the sources will tend to equalize sound levels between t

ملخص المحتوى في الصفحة رقم 2

25' 7.6 m 343 U853PM & U853PMW Connect the TA3F-type connector from the microphone's cable to the TA3M- Specifications type connector in the power module plate. Element Fixed-charge back plate, permanently polarized condenser Note: Audio-Technica has developed a special RFI-shielding mechanism that Polar pattern Cardioid ® is an integral part of the connectors in the UniPoint line. If you remove or Frequency response 30-20,000 Hz incorrectly replace the connector, you may adversely affect the