ملخص المحتوى في الصفحة رقم 1
3-877-945-11(1)
Digital Wireless Microphone System Frequency Lists
TV3033
The following tables show the channels and frequencies that are selectable on your digital wireless microphones, transmitters, and
receivers.
For the setting procedures of the channel/frequency on your units, refer to the Operating Instructions supplied with the units.
Group 00
The group 00 permits the units to operate on any of 47 carrier frequencies in 125-kHz steps of TV channels 30 to 33.
Note
Simultaneous multi-channe
ملخص المحتوى في الصفحة رقم 2
Grouping for digital wireless system Guidance on the use of a multi-channel system using digital wireless system When building up the system with digital wireless devices only, channel intervals can be fixed. No special calculations are necessary to avoid intermodulations. Set channel intervals to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual interference from other Sony wireless microphones/transmitters: –
ملخص المحتوى في الصفحة رقم 3
Group D7 Group D8 Group D9 Grouping 24 channels Grouping 24 channels Grouping 48 channels Channel Frequency Channel Frequency Channel Frequency 30 - 01 566.125 31 - 01 572.125 30 - 01 566.125 30 - 05 566.625 31 - 05 572.625 30 - 05 566.625 30 - 09 567.125 31 - 09 573.125 30 - 09 567.125 30 - 13 567.625 31 - 13 573.625 30 - 13 567.625 30 - 17 568.125 31 - 17 574.125 30 - 17 568.125 30 - 21 568.625 31 - 21 574.625 30 - 21 568.625 30 - 25 569.125 31 - 25 575.125 30 - 25 569.125 30 - 29 569.625 31 -
ملخص المحتوى في الصفحة رقم 4
Grouping for digital wireless system with analog wireless system Guidance on the use of a multi-channel system using digital wireless system with analog wireless system When building up the system with digital and analog wireless devices, use the conventional analog wireless channel groups. Set the intervals between a digital channel and an analog channel to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual inte
ملخص المحتوى في الصفحة رقم 5
TV3436 The following tables show the channels and frequencies that are selectable on your digital wireless microphones, transmitters, and receivers. For the setting procedures of the channel/frequency on your units, refer to the Operating Instructions supplied with the units. Group 00 The group 00 permits the units to operate on any of 47 carrier frequencies in 125 kHz steps of TV channels34 to 36. Notes • Channels on TV-37 are reserved for astronomical purposes and cannot be used. • Simultaneou
ملخص المحتوى في الصفحة رقم 6
Grouping for digital wireless system Guidance on the use of a multi-channel system using digital wireless system When building up the system with digital wireless devices only, channel intervals can be fixed. No special calculations are necessary to avoid intermodulations. Set channel intervals to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual interference from other Sony wireless microphones/transmitters: –
ملخص المحتوى في الصفحة رقم 7
Group D9 Grouping 48 channels Channel Frequency 34 - 01 590.125 34 - 05 590.625 34 - 09 591.125 34 - 13 591.625 34 - 17 592.125 34 - 21 592.625 34 - 25 593.125 34 - 29 593.625 34 - 33 594.125 34 - 37 594.625 34 - 41 595.125 34 - 45 595.625 35 - 02 596.250 35 - 06 596.750 35 - 10 597.250 35 - 14 597.750 35 - 18 598.250 35 - 22 598.750 35 - 26 599.250 35 - 30 599.750 35 - 34 600.250 35 - 38 600.750 35 - 42 601.250 35 - 46 601.750 36 - 01 602.125 36 - 05 602.625 36 - 09 603.125 36 - 13 603.625 36 -
ملخص المحتوى في الصفحة رقم 8
Grouping for digital wireless system with analog wireless system Guidance on the use of a multi-channel system using digital wireless system with analog wireless system When building up the system with digital and analog wireless devices, use the conventional analog wireless channel groups. Set the intervals between a digital channel and an analog channel to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual inte
ملخص المحتوى في الصفحة رقم 9
TV3841 The following tables show the channels and frequencies that are selectable on your digital wireless microphones, transmitters, and receivers. For the setting procedures of the channel/frequency on your units, refer to the Operating Instructions supplied with the units. Group 00 The group 00 permits the units to operate on any of 47 carrier frequencies in 125-kHz steps of TV channels 38 to 41. Note Simultaneous multi-channel operation is not assured with this group. TV-38 TV-39 Channel Fre
ملخص المحتوى في الصفحة رقم 10
Grouping for digital wireless system Guidance on the use of a multi-channel system using digital wireless system When building up the system with digital wireless devices only, channel intervals can be fixed. No special calculations are necessary to avoid intermodulations. Set channel intervals to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual interference from other Sony wireless microphones/transmitters: –
ملخص المحتوى في الصفحة رقم 11
Group D7 Group D8 Group D9 Grouping 24 channels Grouping 24 channels Grouping 48 channels Channel Frequency Channel Frequency Channel Frequency 38 - 01 614.125 39 - 01 620.125 38 - 01 614.125 38 - 05 614.625 39 - 05 620.625 38 - 05 614.625 38 - 09 615.125 39 - 09 621.125 38 - 09 615.125 38 - 13 615.625 39 - 13 621.625 38 - 13 615.625 38 - 17 616.125 39 - 17 622.125 38 - 17 616.125 38 - 21 616.625 39 - 21 622.625 38 - 21 616.625 38 - 25 617.125 39 - 25 623.125 38 - 25 617.125 38 - 29 617.625 39 -
ملخص المحتوى في الصفحة رقم 12
Grouping for digital wireless system with analog wireless system Guidance on the use of a multi-channel system using digital wireless system with analog wireless system When building up the system with digital and analog wireless devices, use the conventional analog wireless channel groups. Set the intervals between a digital channel and an analog channel to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual inte
ملخص المحتوى في الصفحة رقم 13
TV4245 The following tables show the channels and frequencies that are selectable on your digital wireless microphones, transmitters, and receivers. For the setting procedures of the channel/frequency on your units, refer to the Operating Instructions supplied with the units. Group 00 The group 00 permits the units to operate on any of 47 carrier frequencies in 125-kHz steps of TV channels 42 to 45. Note Simultaneous multi-channel operation is not assured with this group. TV-42 TV-43 Channel Fre
ملخص المحتوى في الصفحة رقم 14
Grouping for digital wireless system Guidance on the use of a multi-channel system using digital wireless system When building up the system with digital wireless devices only, channel intervals can be fixed. No special calculations are necessary to avoid intermodulations. Set channel intervals to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual interference from other Sony wireless microphones/transmitters: –
ملخص المحتوى في الصفحة رقم 15
Group D7 Group D8 Group D9 Grouping 24 channels Grouping 24 channels Grouping 48 channels Channel Frequency Channel Frequency Channel Frequency 42 - 01 638.125 43 - 01 644.125 42 - 01 638.125 42 - 05 638.625 43 - 05 644.625 42 - 05 638.625 42 - 09 639.125 43 - 09 645.125 42 - 09 639.125 42 - 13 639.625 43 - 13 645.625 42 - 13 639.625 42 - 17 640.125 43 - 17 646.125 42 - 17 640.125 42 - 21 640.625 43 - 21 646.625 42 - 21 640.625 42 - 25 641.125 43 - 25 647.125 42 - 25 641.125 42 - 29 641.625 43 -
ملخص المحتوى في الصفحة رقم 16
Grouping for digital wireless system with analog wireless system Guidance on the use of a multi-channel system using digital wireless system with analog wireless system When building up the system with digital and analog wireless devices, use the conventional analog wireless channel groups. Set the intervals between a digital channel and an analog channel to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual inte
ملخص المحتوى في الصفحة رقم 17
TV4649 The following tables show the channels and frequencies that are selectable on your digital wireless microphones, transmitters, and receivers. For the setting procedures of the channel/frequency on your units, refer to the Operating Instructions supplied with the units. Group 00 The group 00 permits the units to operate on any of 47 carrier frequencies in 125-kHz steps of TV channels 46 to 49. Note Simultaneous multi-channel operation is not assured with this group. TV-46 TV-47 Channel Fre
ملخص المحتوى في الصفحة رقم 18
Grouping for digital wireless system Guidance on the use of a multi-channel system using digital wireless system When building up the system with digital wireless devices only, channel intervals can be fixed. No special calculations are necessary to avoid intermodulations. Set channel intervals to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual interference from other Sony wireless microphones/transmitters: –
ملخص المحتوى في الصفحة رقم 19
Group D7 Group D8 Group D9 Grouping 24 channels Grouping 24 channels Grouping 48 channels Channel Frequency Channel Frequency Channel Frequency 46 - 01 662.125 47 - 01 668.125 46 - 01 662.125 46 - 05 662.625 47 - 05 668.625 46 - 05 662.625 46 - 09 663.125 47 - 09 669.125 46 - 09 663.125 46 - 13 663.625 47 - 13 669.625 46 - 13 663.625 46 - 17 664.125 47 - 17 670.125 46 - 17 664.125 46 - 21 664.625 47 - 21 670.625 46 - 21 664.625 46 - 25 665.125 47 - 25 671.125 46 - 25 665.125 46 - 29 665.625 47 -
ملخص المحتوى في الصفحة رقم 20
Grouping for digital wireless system with analog wireless system Guidance on the use of a multi-channel system using digital wireless system with analog wireless system When building up the system with digital and analog wireless devices, use the conventional analog wireless channel groups. Set the intervals between a digital channel and an analog channel to 375 kHz or more. When building up a multi-channel system, Sony recommends that one of the following groups is selected to avoid mutual inte
