ملخص المحتوى في الصفحة رقم 1
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente
Country Customer Care Center Web Site Address
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
CANADA 1-800-SAMSUNG (7267864) www.
ملخص المحتوى في الصفحة رقم 2
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on none
ملخص المحتوى في الصفحة رقم 3
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 23 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft. Heat on the top of the P
ملخص المحتوى في الصفحة رقم 4
Contents General Information Channel Control ■ List of Features ..............................................................5 ■ Managing Channels .....................................................40 ■ Accessories ....................................................................5 ■ Clearing Scrambled Channels – Digital .......................46 ■ Viewing the Control Panel .............................................6 ■ Fine Tuning Analog Channels ...................................
ملخص المحتوى في الصفحة رقم 5
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • V-Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set- Top Box) needed. • Excellent Picture Quality - DNIe technology provides life-like clear images. • SRS TruSurround XT - SRS TruSurround
ملخص المحتوى في الصفحة رقم 6
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Front Panel buttons The product color and shape may vary depending on the model. ➢ Touch each button to operate. 1 SOURCE 5 Power Indicator Toggles between all the available input sources Blinks and turns off when the power is on and lights up (TV, AV,
ملخص المحتوى في الصفحة رقم 7
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-14. The product color and shape may vary depending on the model. 1 POWER IN 7 ANT IN Connect the supplied power cord. Uses a 75Ω Coaxial connector for an Air/Cable Network. 2 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component. 8 SERVICE 1 For service only.
ملخص المحتوى في الصفحة رقم 8
Remote Control You can use the remote control up to a distance of about feet from the TV. 1 POWER % SOURCE Turns the TV on and off. Press to display all of the available video sources. 2 TV ^ PRE-CH Selects the TV mode directly. Tunes to the previous channel. 3 NUMERIC BUTTONS & CH Press to directly select a channel. Press to change channels. 4 – * CC Press to select additional channels (digital and analog) being Selects SRS TruSurround XT mode. broadcast by the same stati
ملخص المحتوى في الصفحة رقم 9
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the ➢ compartment. ※ Use alkaline batteries for the remote control. Close the cover as shown in the figure. Remove the batteries and store them in a cool, dry place if you won’t be using the ➢ remote control for a long time. The remote control can be use
ملخص المحتوى في الصفحة رقم 10
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view ➢ ANT IN unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. ANT
ملخص المحتوى في الصفحة رقم 11
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable TV Rear Panel DVD Player or Cable Box / between the HDMI IN (1, 2) Satellite receiver (Set-Top Box) jack on the TV and the HDMI jack on the DVD Player or Cable Box / Satellite receiver (Set-Top Box). 1 HDMI Cable (Not supplied) What is HDMI?
ملخص المحتوى في الصفحة رقم 12
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player/Cable Box/Satellite receiver (Set-Top Box) to your TV. 1 Connect Component Cable TV Rear Panel between the COMPONENT IN (1 or 2) [Y, PB, PR] DVD Player or Cable Box / jacks on the TV and the Satellite receiver (Set-Top Box) COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box / Satellite receiver(Set-Top Box). Connect Au
ملخص المحتوى في الصفحة رقم 13
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT TV Rear Panel terminal on the VCR and the ANT IN termina
ملخص المحتوى في الصفحة رقم 14
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1 Connect an Optical Cable TV Rear Panel between the DIGITAL AUDIO OUT (OPTICAL) jacks on Digital Audio System the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV, and adjust the volume level with t
ملخص المحتوى في الصفحة رقم 15
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. It may take a while when your TV starts. ➢ Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in memory will allow you to scan the stored channels rather than have to enter th
ملخص المحتوى في الصفحة رقم 16
Plug & Play 5 The TV will begin memorizing all of the available channels. Auto Program in Progress. T o stop the search before it has finished, press the ENTER button with ➢ DTV Air : -- Air : -- stop selected. DTV Cable : -- Cable : -- Air 3% After all the available channels are stored, the TV starts to remove scrambled channels (see page 46). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete. Stop The Clock Mode menu is displayed. Enter
ملخص المحتوى في الصفحة رقم 17
Setup If you want to reset this feature... 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Plug & Play ► Language : English Press the ENTER button to select Plug & Play. For further details on setting Time up options, refer to the pages 15~16. V-Chip The Plug & Play feature is only available in the TV. ➢ Caption External Settings Entertainment : Off Energy Saving : Off Plug & Play Menu Language, Store Demo, Channels, and
ملخص المحتوى في الصفحة رقم 18
Picture Adjusting the Volume Using the Volume Buttons 1 Press the VOL or VOL button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. Mute will displayed on the screen. To turn mute off, press the MUTE button again, or simply press the VOL or VOL button. Viewing the Display The display identifies the current channel and the status of certain audio-video settings. 1 Press the INFO b
ملخص المحتوى في الصفحة رقم 19
Channel Channel Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu changes depending on which external input mode you are viewing. TOOLS Device List 1 Press the TOOLS button. Picture Mode : Standard The TOOLS menu will appear. Sound Mode : Custom Sleep Timer : Off Press the ▲/▼ button to select a menu, then press the ENTER button. Add to Favorite Switch to Air Press the ▲/▼/◄/►/ ENTER b
ملخص المحتوى في الصفحة رقم 20
Channel Storing Channels in Memory (Automatic Method) 1 Press the MENU button to display the menu. Antenna : Air Press the ▲ or ▼ button to select Channel, then press the ENTER button. Auto Program ► Channel List Clear Scrambled Channel Press the ▲ or ▼ button to select Auto Program, then press the ENTER Fine Tune button. Signal Strength Press the ▲ or ▼ button to select an antenna connection, then press the Auto Program ENTER button. Select the Antenna source to memorize. Air: Ai
