ملخص المحتوى في الصفحة رقم 1
MICRO-36
Microcassette Tape
Recorder
Owner’s Manual
Please read before using this equipment.
ملخص المحتوى في الصفحة رقم 2
Contents Features ............................................... 3 A Quick Look at Your Recorder ......... 4 Preparation .......................................... 5 Connecting Power .......................... 5 Using Batteries ....................... 5 Using AC or DC Power ........... 6 Connecting an Earphone ............... 8 Listening Safely ...................... 8 Traffic Safety ........................... 9 Operation ........................................... 10 Loading a Microcassette
ملخص المحتوى في الصفحة رقم 3
Features Your RadioShack MICRO-36 Microcas- sette Tape Recorder is ideal for quick note-taking. Its ultra-small size makes it easy to slip into a pocket or briefcase. You can use it at school, at business confer- ences, for dictation in the office, or any- where on the go! Built-In Microphone and Speaker — let you record and play back notes anywhere. Quick Record — lets you instantly change from playback to record. Tape Speed Switch — lets you record at normal or slow speed. Slow speed gives
ملخص المحتوى في الصفحة رقم 4
A Quick Look at Your Recorder Normal/ F.Play REC SPEED PLAY DC3V REV/ REW FF/ CUE STOP EAR VOLUME 4 A Quick Look at Your Recorder
ملخص المحتوى في الصفحة رقم 5
Preparation To protect the recorder during shipment, a piece of paper is attached to the cassette door. Remove this paper before you use the recorder. CONNECTING POWER You can power your recorder from internal battery power, AC power (with an optional AC adapter), or your vehicle’s battery (with an optional DC adapter). Using Batteries Your recorder requires two AA batteries (not supplied) for power. For the best per- formance and longest life, we recommend RadioShack alkaline batteries. Cauti
ملخص المحتوى في الصفحة رقم 6
rechargeable batteries of different capacities. • If you do not plan to use the recorder for several days, or if you plan to use only AC or vehicle battery power, remove the batteries. Batteries can leak chemicals that can destroy elec- tronic parts. 1. Slide the battery compartment cover in the direction of the arrow until it stops, then lift up the cover. Caution: The battery compartment cover is attached to the recorder. Do not try to remove it. 2. Place the batteries in the compart- ment as
ملخص المحتوى في الصفحة رقم 7
(neither supplied, available at your local RadioShack store). Cautions: You must use a (Class 2 for AC) power source that sup- ! plies 3 volts DC power and delivers at least 200 mA. The center tip of the Adaptaplug must be set to positive, and the plug must properly fit the recorder’s DC3V jack. Using an AC adapter and plug that do not meet these specifications could damage the recorder, the adapter, or the plug. • Always connect the adapter to the recorder before you plug it into the power sour
ملخص المحتوى في الصفحة رقم 8
4. Plug the other end of the adapter into the power source. CONNECTING AN EARPHONE You can use an optional mono earphone 3 with a submini ( /32-inch) plug to listen to a tape in privacy. Notes: • You can also use an earphone to monitor what the recorder picks up through the internal microphone or an external microphone. • Your local RadioShack store carries a wide selection of earphones. Insert the earphone’s plug into the record- er’s EAR jack. The built-in speaker auto- matically disconnects.
ملخص المحتوى في الصفحة رقم 9
begin listening, adjust the volume to a comfortable level. • Do not listen at extremely high vol- ume levels. Extended high-volume listening can lead to permanent hear- ing loss. • Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a vol- ume level that does not cause dis- comfort might still damage your hearing. Traffic Safety Do not wear an earphone while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be i
ملخص المحتوى في الصفحة رقم 10
Operation LOADING A MICROCASSETTE TAPE We recommend MC-60 microcassette tapes for up to 2 hours of recording/play- back time, or MC-90 microcassette tapes for up to 3 hours of recording/playback time. 1. Use a pencil to turn the cassette’s hub and remove any tape slack. Avoid touching the tape. 2. Lift the latch and open the cassette compartment door. 3. Insert the microcassette into the door’s guides so the microcassette’s open edge faces out. Note: An arrow on the cassette com- partment doo
ملخص المحتوى في الصفحة رقم 11
RECORDING 1. Load a cassette. 2. Set SPEED on the side of the recorder as follows: • To double the cassette’s recording/ playback time, set SPEED to 1.2. This setting allows 120 minutes of total recording/playback time on an MC-60 tape, or 180 minutes on an MC-90 tape. • For better sound quality, set SPEED to 2.4. This setting allows 60 minutes of total recording/play- back time on an MC-60 tape, or 90 minutes on an MC-90 tape. 3. Press REC to begin recording. Both REC and PLAY lock down. Cautio
ملخص المحتوى في الصفحة رقم 12
Notes: • The automatic level control circuit automatically sets the recording level. The VOLUME setting does not affect the recording level. • To pause recording, slide PAUSE/ OFF to PAUSE. To resume record- ing, slide PAUSE/OFF to OFF. 4. Press STOP to stop the cassette. PLAYING A CASSETTE 1. Load the cassette. 2. Set SPEED to the speed used when the cassette was recorded. 3. To listen to the cassette at normal speed, set NORMAL/F.PLAY to NOR- MAL. To listen to the cassette at about 25% faster
ملخص المحتوى في الصفحة رقم 13
6. Press STOP to stop playback. Rewinding/Fast-Forwarding If you slide the switch to REV REW or FF CUE when the cassette is stopped, the cassette advances or rewinds until you press STOP or slide the switch to the posi- tion between REV REW and FF CUE. To slide REV REW/FF CUE to the desired position, press the side of the switch op- posite the side marked with the desired di- rection. Caution: To protect the tape-handling parts, press STOP or slide REV REW/FF CUE to the center when the tape reac
ملخص المحتوى في الصفحة رقم 14
Tape Tips STORING A CASSETTE Do not expose cassettes to high tempera- tures, high humidity, dust or dirt, or mo- tors, transformers, or other sources with strong magnetic fields. PREVENTING ACCIDENTAL ERASURE Most cassettes have an erase-protection tab for each side of the cassette. To pro- tect your recordings from being acciden- tally erased or recorded over, use a screwdriver to carefully break off the erase-protection tabs. If you later decide to erase or record over the cassette, place a
ملخص المحتوى في الصفحة رقم 15
ERASING A CASSETTE If you no longer want a recording, you can record over it or erase it. To record over a cassette, be sure the erase-protection tabs are in place. Then simply record as usual. The recorder records over the previous recording. You might prefer to use a bulk tape eraser which erases both sides of a tape in just a few seconds. 15 Tape Tips
ملخص المحتوى في الصفحة رقم 16
Care Keep the recorder dry; if it gets wet, wipe it dry immediately. Use and store the re- corder only in normal temperature envi- ronments. Handle the recorder carefully; do not drop it. Keep the recorder away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Modifying or tampering with the recorder’s internal components can cause a mal- function and might invalidate its warranty. If your recorder is not performing as it should, take it to your local Radio
ملخص المحتوى في الصفحة رقم 17
2. Press PLAY to expose the tape-han- dling parts. Tape-Handling Parts 3. Use a cotton swab dipped in tape head cleaning solution or denatured alcohol to gently clean the the tape- handling parts (record/playback head, pinch roller, capstan and tape guides). 4. Press STOP to release the tape-han- dling parts. Then close the cassette compartment door and reconnect power. Note: For easier cleaning, you can use a microcassette cleaner kit, which includes a special cleaning tape. Your local RadioSha
ملخص المحتوى في الصفحة رقم 18
Specifications Tape Type .................................. Microcassette Tracks .............. 2 Tracks, 1 Channel Monaural Drive System ............................ Capstan Drive 15 Tape Speed ................... 2.4 cm/sec. ( /16 ips) 15 1.2 cm/sec. ( /32 ips) Recording Time (with MC-60): 2.4 cm/sec. ............................ 30 min. per side 1.2 cm/sec. ............................ 60 min. per side Practical Max. Output ......................... 200 mW Frequency Response ...............
ملخص المحتوى في الصفحة رقم 19
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice. 19 Specifications
ملخص المحتوى في الصفحة رقم 20
Limited Ninety-Day Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and au- thorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DU- RATION TO THE DURATION OF THE WRIT
