ملخص المحتوى في الصفحة رقم 1
BR-HD50 HD VIDEO CASSETTE RECORDER
E
HD VIDEO CASSETTE RECORDER
INSTRUCTION MANUAL
BR-HD50
For Customer Use:
This instruction manual is made from 100% Enter below the Serial No. which is
recycled paper.
located on the rear of cabinet. Retain
this information for future reference.
Thank you for purchasing this JVC product.
Before operating this unit, please read the Model No. BR-HD50U
instructions carefully to unsure the best possi-
Serial No.
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS (For USA & Canada) 1. Read all of these instructions. 2. Save these instructions for later use. CAUTION ATTENTION 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol RISK OF ELECTRIC RISQUE D’ELECTRO- SHOCK DO NOT OPEN CUTION NE PAS cleaners. Use a damp cloth for cleaning. OUVRIR 5. Do not use attachments not r
ملخص المحتوى في الصفحة رقم 3
Supplement SAFETY PRECAUTIONS (For Europe) This equipment is in conformity with the provisions and protection requirements of the corresponding POWER SYSTEM Warning Notice European Directives. This equipment is designed for professional video appliances and can be used in Connection to the mains supply FOR YOUR SAFETY (Australia) the following environments: This unit operates on voltage of 220 V to 240 V AC, 50 Hz/60 1. Insert this plug only into effectively earthed three-pin power Hz. outle
ملخص المحتوى في الصفحة رقم 4
Table of Contents Equipped with HDMI terminal Thank you for purchasing our HD Video INTRODUCTION PLAYBACK Outputs digital video and digital audio. Remarks of usage...............................................4 Playback settings............................................. 49 Cassette Recorder BR-HD50 View HD video on monitors with an HDMI ter- Cassette tape......................................................5 Basic playback procedure................................ 51 minal.
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION Remarks of usage Cassette tape BR-HD50 can record onto and playback standard Erasure prevention Place of storage and use Maintaining the unit (Turn off the power DV and mini DV cassette tapes (for SP mode DV cassettes have a safety slide at the back to Avoid storing or using this VCR in the following before performing maintenance work.) only). prevent accidental erasure. places: Wipe the unit with a soft cloth. Use the following JVC cassettes w
ملخص المحتوى في الصفحة رقم 6
INTRODUCTION HDV and DV format This unit records in HDV or DV format. HDV (720p) and DV format DV format is a standard for recording SD (Standard-Definition) video onto DV cassettes or mini DV cas- HDV 720p format DV format settes. HDV format is a standard for recording HD (High-Definition) video onto DV cassettes or mini DV cas- Video signal *1 60Hz:720/30p, 720/24p, 480/60p U(NTSC) : 480/60i settes. 50Hz:720/25p, 576/50p E (PAL) : 576/50i The two HDV recording formats are HDV 720p and HD
ملخص المحتوى في الصفحة رقم 7
INTRODUCTION Regular maintenance Cleaning tape This unit uses consumables or components that will wear off. If a worn-out or deteriorated component Use a JVC cleaning tape. Note continues to be used, it may cause the unit to break down. To prevent this, perform routine mainte- Follow the instructions below for using the clean- Under low humidity conditions, (10% RH to nance using the head-cleaning tape. With the head-cleaning tape alone, however, the entire tape-wind- ing tape. 30% RH), pe
ملخص المحتوى في الصفحة رقم 8
NAMES AND FUNCTIONS OF PARTS Front panel [PLAY] button/LED [STOP] button/LED 21 •Press this button to start playing back a •Press this button to stop operation. tape. During playback, the green LED lights •When BR-HD50 is in the STANDBY-OFF up. mode, press this button to enter the •When recording is paused, press this but- STANDBY-ON mode. ton to resume recording. •While stopped, the LED lights green. 3 [PAUSE] button/LED Memo •During recording, press this button to pause There are t
ملخص المحتوى في الصفحة رقم 9
NAMES AND FUNCTIONS OF PARTS Front panel (continued) 8[IEEE1394] IEEE1394 terminal switch [DVCAM] indicator light a Set this switch according to the video format of Lights when playing a tape recorded in the IEEE1394 input signal and playback sig- DVCAM format. nal. When the video format is HDV, a HDV Only tapes recorded in SP mode can be indicator is lit. played. HDV :Use this setting when the video [60] indicator light format is HDV (HDV indicator is Lights when 60/50 SEL in the SY
ملخص المحتوى في الصفحة رقم 10
NAMES AND FUNCTIONS OF PARTS Front panel (continued) [BLANK/P] button [SEARCH–/Q] button e f •When BR-HD50 is in the STOP mode, •During normal display, the function of this press this button to start blank search. It button can be selected using “Q,S” KEY searches the unrecorded part of the tape FUNC. in the SYSTEM [1/2] Menu screen. and goes into the still mode. If it is set to VAR/RECV, the searching (XPage 54 “Blank search”) speed decreases if this button is pressed •During the STOP or
ملخص المحتوى في الصفحة رقم 11
NAMES AND FUNCTIONS OF PARTS Rear panel 5[COMPONENT OUT] Component sig- 9[CH2/4 AUDIO OUT] terminal (RCA) 2 1 67 Use this terminal to output analog audio sig- nal output terminal (BNC×3) nals. Output terminal for component video signals •In the 48kHz audio mode, it outputs the (Y/PB/PR). Outputs analog HD/SD video. Con- nect this to an HD-compatible monitor with a sound of CH2. •The output audio channel during playback COMPONENT IN terminal. of tapes recorded in 32kHz audio mode, or •The vid
ملخص المحتوى في الصفحة رقم 12
NAMES AND FUNCTIONS OF PARTS Rear panel (continued) e[SERIAL REMOTE] terminal (mini jack) This terminal is for connecting to the serial remote controller. g To operate BR-HD50 with this terminal, per- form the following settings. •Set REMOTE SEL SER in the REMOTE [1/ 2] Menu screen to “ON” or “LOC+REM”. ON :When the 5 REMOTE/LOCAL switch on the front panel is set to “REMOTE”, this terminal becomes d effective. LOC+REM :This terminal is effective regard- less of the setting of the 5 REMOTE/LOCA
ملخص المحتوى في الصفحة رقم 13
ON-SCREEN DISPLAY ON-SCREEN DISPLAY On-screen display Status display Besides E-E images and playback images, the monitor connected to the VIDEO OUTPUT terminals Status display: It displays the current settings and operating status. (VIDEO LINE OUT, Y/C OUT, COMPONENT OUT and HDMI OUT) provides the following on-screen information. DV format HDV format 1 1 Monitor DV 3 2 K CH – 1 / 2 SP 2 0mi n HDV–S HD3 0 P P20mi n VIDEO OUTPUT WARNI NG 7001 DRUM MOTOR FAI LURE REC I NH I B I T On-screen displ
ملخص المحتوى في الصفحة رقم 14
ON-SCREEN DISPLAY Status display (continued) No. Item Description DV 3 2 K CH – 1 / 2 SP 2 0mi n 5 3 Counter display Displays the CTR counter, time code or user’s bit. The dis- played contents can be selected using the COUNTER switch. WARNI NG 7001 DRUM MOTOR FAI LURE •CTL counter: It will be displayed if the COUNTER switch is set to CTL. The counter shows a 7-digit REC I NH I B I T number (hour, minute, second and frame) with + or – and “CTL” at the beginning, e.g., CTL-9:30:20:10 06 / 1 0 /
ملخص المحتوى في الصفحة رقم 15
ON-SCREEN DISPLAY Event/Alarm display “B” display:Messages for incorrect operation are displayed for about 3 seconds. Event display :When certain functions are in use, it is displayed at the following posi- They are displayed when the DISPLAY mode is ON or AUTO. tions (with the DISPLAY mode ON or AUTO). “A” display: displayed during operation Display Description DV 3 2 K CH – 1 / 2 SP 2 0m i n Display Description INVALID TAPE! Data tape for PCs or DVC PRO tape is used. The cassette tape
ملخص المحتوى في الصفحة رقم 16
CONNECTION Connecting video signals HDMI OUT terminal Video output, e.g., VCR/Camera Caution regarding video signals Outputs HDMI signals. If search images or analog video signals with Outputs digital video and digital audio signals. Analog input Digital input a high level of jitter are input, video or sound Connect to a monitor with an HDMI terminal HDV/DV Composite Y/C HD/SD Digital may be distorted temporarily. Input stable sig- using an HDMI cable. HDMI OUT nals, such as signals
ملخص المحتوى في الصفحة رقم 17
CONNECTION CONNECTION Connecting audio signals Attaching the supplied ferrite core Always attach the supplied ferrite core to the IEEE1394 cable and DC cord to decrease unnecessary Audio output, e.g., VCR/Camera wave radiation. Attach the ferrite core close to the unit. HD monitor input Digital audio Analog audio For BR-HD50 IEEE1394 terminal Digital audio HDV/DV HDMI OUT AUDIO IN Supplied ferrite core Headphones AUDIO IEEE1394 Monitor OUT Wrap the cable once around the ferrite core. An
ملخص المحتوى في الصفحة رقم 18
CONNECTION CONNECTION Connecting with SERIAL REMOTE terminals Connecting the AC adapter The following describes examples of SERIAL REMOTE terminal connection. Connect the supplied AC adapter to BR-HD50. To use the SERIAL REMOTE terminals, set REMOTE SEL SER of the REMOTE [1/2] Menu screen 1. Clamp to “ON” or “LOC+REM.” (XPage 70) Screw 3. Clamp Operate BR-HD50 with the wired remote controller Connect the wired remote controller to the SERIAL REMOTE terminal. Supplied AC adapter DC IN ter
ملخص المحتوى في الصفحة رقم 19
RECORDING/OUTPUT SIGNAL FORMAT RECORDING/OUTPUT SIGNAL FORMAT Inputting analog signal Inputting digital signal Recording and output terminal video/audio signal format when inputting analog Recording and output terminal video/audio signal format when inputting digital signal signal Input terminal Output terminal Input terminal Output terminal Video signals LINE Front panel Tape : HDV (720p, 480p, 576p) IN Audio signals Tape: DV recording (480i, 576i) IEEE1394 switch DV (480i, 576i) recording V
ملخص المحتوى في الصفحة رقم 20
RECORDING/OUTPUT SIGNAL FORMAT PREPARATION Playback Turning on/off the power Output terminal video/audio signal format during playback Turning on the power Output terminal Press the OPERATE button when BR- OPERATE indicator Tape : HDV (720p, 480p, 576p)/ HD50 is in the OPERATE OFF mode DV (480i, 576i)/DVCAM (480i, 576i) Video signals format (with the OPERATE indicator lit up in Audio signals OPERATE red) button •The power is turned on and the OPERATE indicator lights up in green. BR-HD50
