Milwaukee ToolsSM402 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

SPECIFICATIONS:
Milwaukee
Milwaukee
USER MANUAL
RANGE / RESOLUTION
SM301 0 to 1990 μS/cm / 10 μS/cm
PORTABLE
SM302 0.0 to 10.0 mS/cm / 0.1 mS/cm
CONDUCTIVITY & TDS METERS
SM401 0 to 1990 mg/L (ppm) / 10 mg/L
SM402 0.0 to 10.0 g/L (ppt) / 0.1 g/L
MODELS: SM301, SM302, SM401, SM402
ACCURACY (@25°C) ±2% Full Scale
CONVERSION FACTOR
Smart EC & TDS Meters
SM401 0.5
SM402 0.5
CALIBRATION SOLUTIONS
SM301 1413 μS/cm (M10031B)
SM302 5.00 mS/cm (M10039B)
SM401 1382 mg/L (M10032B)
SM402 6.44 g/L (M10038

ملخص المحتوى في الصفحة رقم 2

• Adjust the calibration trimmer on the rear OPERATION: of the instrument with the supplied • The meter is supplied complete with a screwdriver until the display shows: 9V battery. Slide off the battery com- "1410" μS/cm for SM301 partment cover on the back of the meter. Install the battery while paying "5.0" mS/cm for SM302 attention to its polarity. "1380" mg/L (ppm) for SM401 • Connect the probe to the meter se- "6.4" g/L (ppt) for SM402 curely by aligning the pins with the • The calibration