ملخص المحتوى في الصفحة رقم 1
GMI 10 Installation Instructions
To obtain the best possible performance, install your GMI 10 Marine Instrument according to the following instructions.
If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional
installer.
The GMI 10 will communicate with NMEA 2000- or NMEA 0183-compatible sensors and devices, and can show
information such as speed, heading, water depth, and fuel information when connected to the appropriate sens
ملخص المحتوى في الصفحة رقم 2
Step 1: Selecta Location for the GMI 10 Consider the following when you select an installation location: • Provides optimal viewing as you operate your vessel. • Allows easy access to the keypad on the GMI 10. • Is strong enough to support the weight of the GMI 10 and protect it from excessive vibration or shock. • Allows room for the routing and connection of the cables. There should be at least a 3 inch (8 cm) clearance behind the case. 1 • Is at least 9 / in. (241 mm) from a magnetic com
ملخص المحتوى في الصفحة رقم 3
7. Place the GMI10 into the cutout. 8. Securely tighten the four mounting screws through the GMI 10 into the drilled mounting holes. NOTE: Stainless-steel screws may bind when screwed into fiberglass and overtightened. Garmin recommends applying an anti-galling, stainless anti-seize lubricant to the screw before using. 9. Install the mounting covers by snapping them into place. Step3: Connect the GMI 10 to Sensors and to Power The GMI 10 can connect to sensors using either
ملخص المحتوى في الصفحة رقم 4
GMI 10 NMEA 000 device NMEA 000 (not included) device (not included) Drop cable (included) T-connector (included) Existing NMEA 000 network Connectingthe GMI 10 to an Existing NMEA 2000 Network Ignition or in-line switch Fuse NMEA 000 device (not included) + - 1 Vdc battery Additional Drop cable drop cable and Power cable T-connector (not included) T-connectors Male Female terminator terminator Creating aBasic NMEA 2000 Network Notes: • T o add addition
ملخص المحتوى في الصفحة رقم 5
Connecting the GMI 10 through NMEA 0183 The GMI 10 can receive NMEA 0183 data from one device. The GMI 10 displays the received data, but cannot transmit the data to another NMEA 0183 device or transmit the data to a NMEA 2000 network. Use the diagrams to wire a NMEA 0183 device to your GMI 10. Use 22 AWG, shielded, twisted-pair wiring for extended runs of wire. Solder all connections and seal them with heat-shrink tubing. GMI 10 Device Color Function Black AccessoryOff(-) Yellow Accesso
ملخص المحتوى في الصفحة رقم 6
If your NMEA 0183-compatible device has only one transmitting wire (Tx), connect it to the brown wire (Rx/A) from the GMI 10, and connect the green wire (Rx/B) from the GMI 10 to NMEA ground. NMEA 000 network + - Battery WIRE WIRE 12 Vdc COLOR FUNCTION POWER GMI10 GREEN NMEAGND NMEA 0183- Device BLACK POWERGND Compatible Device BROWN Tx Wiring the GMI 10 toa NMEA 0183 Device with One Transmitting Wire NOTE: When connecting a NMEA 0183 device with only one transmitting
ملخص المحتوى في الصفحة رقم 7
Receive Transmit 130311 Environmental Parameters 130312 Temperature 130313 Humidity 130314 ActualPressure NMEA 0183 Sentence Information The GMI 10 can receive the following approved NMEA 0183 sentences from a NMEA 0183-compliant device: BOD, BWC, DBT, DPT, GGA, GLL, GSA, GSV, HDG, HDM, MDA, MTW, MWD, MWV, RMB, RMC, VHW, WPL, and XTE. Specifications Physical 5 3 29 Dimensions: W × H × D: 4 / × 4 / × 1 / in (109 × 111 × 48 mm) 16 8 32 Weight: 9.6 oz. (272 g) Cables: NMEA 0183 data cable -
ملخص المحتوى في الصفحة رقم 8
For the latest free softwareupdates (excluding map data) throughoutthe life of your Garmin products, visit the GarminW eb site at www.garmin.com. © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. st 1200East 151 Street,Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation nd No. 68, Jangshu2 Road, Sijhih, T aipei County , T aiwan www.garmin.com January 2010 Pa
