Cateye HL-EL830RC دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

HL-EL830RC
Pat. and Design Pat. Pending Copyright©2007 CATEYE Co., Ltd. ENG
12 34 567
INTRODUCTION
Before using the light, be sure to thoroughly read this instruction manual
and accompanying "Lithium-ion Batteries".
This product combines high-power LEDs, Cateye Opticube lens technology, and compact
1 Light unit 4 Battery charger 7 Cable straps (x 2)
lithium ion battery to produce a super bright, extremely durable high-performance light.
2 Battery unit (lithium-ion batteries) 5 Bracket H34
3 Ba

ملخص المحتوى في الصفحة رقم 2

HOW TO USE A Switching on/off Use the switch to switch between Hi and Low beams. NOTE: The switch becomes hot while using the light unit. This is normal. A Switch Run time Press: Hi Low Hi Approx. 2.5 hours (Hi mode) Long press: Turn off * The run time varies with the environment or conditions in which it is used. B How to Adjust Beam Angle Adjust the beam angle to avoid dazzling oncoming traffic by slightly loosening the dial Switch of the bracket. NOTE: • Do not loosen the dial too m