ملخص المحتوى في الصفحة رقم 1
WALK BEHIND SCRUBBER
Operating Instructions (ENG)
Instrucciones de funcionamiento (SPA)
MODELS: SCX326
10052400
IPX4
Read these instructions before using the machine
Lea las instrucciones antes de utilizar la máquina
AR
86039100 02/20/09
PRV NO. 98966
ملخص المحتوى في الصفحة رقم 2
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS Machine Data Log/Overview.........................2 Brush Shrouds & Brush Skirts .......... .........4-10 Table of Contents..........................................3 Vacuum Motor .................................. .........4-11 Actuator Scrub Deck......................... .........4-12 Machine Troubleshooting ................. .........4-13 HOW TO USE THIS MANUAL How to use this Manual.................................1-1 GROUP PARTS LIST Control Handle.......
ملخص المحتوى في الصفحة رقم 4
HOW TO USE THIS MANUAL This manual contains the following sections: The SAFETY section contains important information regarding hazard or unsafe practices of the - HOW TO USE THIS MANUAL machine. Levels of hazards are identified that could - SAFETY result in product or personal injury, or severe injury - OPERATIONS resulting in death. - MAINTENANCE The OPERATIONS section is to familiarize the - PARTS LIST operator with the operation and function of the machine. The HOW TO USE
ملخص المحتوى في الصفحة رقم 5
IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. ! WARNING: To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, le
ملخص المحتوى في الصفحة رقم 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. ! CAUTION CAUTION - Hazards or unsafe practices which could res
ملخص المحتوى في الصفحة رقم 7
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. SAFETY DECAL 86252530 PRV NO. 81494 BATTERY CAUTION 86252520 PRV NO. 80885 SEE MANUAL CIRCUIT BREAKER DECAL 86243610 2% GRADE WARNING PRV NO. 500579 CUTTER 36V 86039100 05/01/07 2-3
ملخص المحتوى في الصفحة رقم 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Nominal power 2160 W Rated Voltage 36 Volt DC Rated Amperage 60 amps Batteries 6 x 6 volt 250-305-335 AH @ 20 Hr rate Scrub Brush Motors 2 x .75 hp (.56 kW) Vacuum Motor 3 Stage .75 hp (.56 kW) Propelling Motor .75 hp (.56 kW) Mass (GVW) 1265 lb (574 kg) w/335 AH batteries Weight empty without batteries 433 lb (196 kg) Solution Control Gravity feed, fully variable with automatic shut-off in neutral Solution tank capacity 33 gal (125
ملخص المحتوى في الصفحة رقم 9
TECHNICAL SPECIFICATIONS ITEM MEASURE Height 46 in (117 cm) Length with 32 in. (81 cm) scrub head 71 in (180) Width without squeegee and scrub head 28 in (71 cm) Width of squeegee for 32 in. (81 cm) scrub head 39 in (99 cm) Width of scrub path for 32 in. (81 cm) scrub head 32 in (81 cm) WIDTH LENGTH HEIGHT SPECIAL NOTES: The sound pressure level at the operator’s ear was measured to be 75 dBA. This was a nearfield, broad-band measurement take
ملخص المحتوى في الصفحة رقم 10
HOW THE MACHINE WORKS The Saber Cutter is a battery powered, self- propelled, hard floor scrubber intended for The function of the recovery system is to vacuum commercial use. The appliance applies a the soiled water back into the recovery tank. The cleaning solution onto a hard floor, scrubs the recovery system consists of the squeegee, floor with brushes, and then vacuums the soiled vacuum motor, float ball filter, recovery tank and water back into the recovery tank. controls. The
ملخص المحتوى في الصفحة رقم 11
COMPONENTS 12 3 14 7 2 1 6 13 11 5 9 15 8 10 4 1. Control Panel 2. Front Cover 3. Recovery Tank 4. Recovery Tank Drain Hose 5. Scrub Head Shrouds 6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Squeegee 11. Aqua-Mizer 12. Top Cover 13. Vacuum Motor 14. Recovery Tank Dome 15. Accessory Pump Port (Optional) CUTTER 36V 86039100 05/01/07 3-4
ملخص المحتوى في الصفحة رقم 12
CONTROLS 2 13 5 3 6 9 8 1 15 7 16 4 10 14 12 12 11 CUTTER 36V 86039100 05/01/07 3-5
ملخص المحتوى في الصفحة رقم 13
CONTROLS 1. Key Switch 9. Vacuum Switch 2. Emergency Shut Off Switch (Optional) 10. Squeegee Lift Lever 3. Speed Control Knob 11. Squeegee Pitch Adjustment Knob 4. Propel Control Lever 12. Squeegee Deflection Adjustment Knobs 5. Reverse Button 13. Battery Charge Level Indicator 6. Brush Switch 14. Parking Brake (Optional) 7. Actuator Switch 15. Hour Meter (Optional) 8. Solution Control Knob 16. Brush Pressure Indicator 1. KEY SWITCH 4. PROPEL CONTROL
ملخص المحتوى في الصفحة رقم 14
CONTROLS 10. SQUEEGEE LIFT LEVER 7. ACTUATOR SWITCH Raises and lowers the squeegee. Adjusts the amount of brush pressure to the floor by To lower the squeegee, lift the lever raising or lowering the scrub deck. from its raised position. To increase brush pressure, press the bottom of the To raise the squeegee, lift the lever from switch. its lowered position. To decrease brush pressure or rise the scrub deck, press the top of the switch. 11. SQUEEGEE PITCH ADJUSTMENT
ملخص المحتوى في الصفحة رقم 15
CONTROLS 13. BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bar illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will also in
ملخص المحتوى في الصفحة رقم 16
MACHINE OPERATION FILLING SOLUTION TANK PRE-RUN MACHINE INSPECTION FOR SAFETY: Before leaving or servicing Do a pre-run inspection to find possible problems that machine; stop on level surface, turn off machine could cause poor performance or lost time from and remove key. breakdown. Follow the same procedure each time to avoid missing steps. 1. Turn the machine power off. NOTE: See maintenance section for pre-run machine inspection checklist items. 2. Set the parking br
ملخص المحتوى في الصفحة رقم 17
MACHINE OPERATION NORMAL SCRUBBING TO BEGIN SCRUBBING Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area ! WARNING to be cleaned. For efficient operation, the runs When operating the machine around people, pay close attention for unexpected movement. Use should be the longest possible without turning, extra caution around children. stopping, or raising and lowering scrub deck/squeegee. ! CAUTION NOTE: In order to achieve the
ملخص المحتوى في الصفحة رقم 18
MACHINE OPERATION RECOVERY TANK DOUBLE SCRUB 1. Unhook the large drain hose from the retainer. For floors which are heavily soiled or have thick Unscrew the T-handle on plug enough to loosen accumulations of floor finish may not clean plug, then lower hose in direction of the drain. sufficiently with one pass. In these cases it will be Do not stand in front of end of hose. Recovered necessary to double scrub. solution will come out with force. Slowly remove To double scrub, mak
ملخص المحتوى في الصفحة رقم 19
MAINTENANCE SERVICE SCHEDULE MAINTENANCE DAILY WEEKLYMONTHLY 50 100 200 HRS HRS HRS Check batteries after charging; add water if necessary * Check pad wear to prevent buildup of * chemicals Check linkages and connectors for wear and damage * Check hoses for wear, blockages, or damage * Clean squeegee; check for adjustment; inspect for wear * Check handles, switches, knobs, domes, and gaskets for damage * Clean out recovery tank * Clea
ملخص المحتوى في الصفحة رقم 20
MAINTENANCE 5 1 12 7 11 9 6 3 4 10 8 2 1. Batteries 2. Squeegee 3. Aqua Mizer 4. Scrub Brushes 5. Recovery Tank Float Shut-Off 6. Solution Strainer 7. Brush Motor 8. Traction Motor 9. Circuit Breakers 10. Brush Shroud & Brush Skirts 11. Vacuum Motor 12. Actuator Scrub Deck CUTTER 36V 86039100 05/01/07 4-2
