Snapper 7600053 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

#7600053 TWIN BAG CATCHER FRAME STIFFENER KIT FOR
SNAPPER / SIMPLICITY RZT & JAVELIN TWIN BAG CATCHERS
The Twin Bag Catcher Frame Stiffener Kit is designed to provide extra support to the catcher frame.
WARNING
! !
DO NOT attempt any adjustments, maintenance, repairs, or service with engine running. Stop engine. Engage
parking brake. Remove key. Remove spark plug wire and secure wire away from spark plug. Engine, muffler and
surrounding areas are extremely hot. Avoid serious burns; allow compone

ملخص المحتوى في الصفحة رقم 2

STEP 6: Install the supplied hex capscrew (H) through the hole in both the stiffener bracket and the channel assembly, securing with a flange nut (D). Tighten the hardware installed in Steps 5-6. STEP 7: Using the hole in either end of the stiffener bracket as a template, drill two 11/32” thru holes (G) down through the U-tube. STEP 8: Install the two remaining supplied carriage bolts (C) down through the holes in the ends of the stiffener bracket and U-tube. Install one saddle bracket (F) up