Snapper 7600036 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

7600036 BRAKE KIT FOR
SNAPPER & SIMPLICITY RZT/JAVELIN RIDING MOWERS
WARNING
! !
DO NOT attempt any adjustments, maintenance, repairs, or service with engine running. Stop engine. Engage
parking brake. Remove key. Remove spark plug wire and secure wire away from spark plug. Engine, muffler and
surrounding areas are extremely hot. Avoid serious burns; allow components to cool down before installing kit.
Replace worn or damaged parts prior to operating. Use approved fuel container. DO NOT smoke ne

ملخص المحتوى في الصفحة رقم 2

STEP 4: Repeat Steps 2-3 for the left brake arm. NOTE: The left brake assembly is equipped with a washer between the cotter pin and brake rod, and is not equipped with a return spring. See Figure 3. WASHER BETWEEN COTTER PIN AND BRAKE ROD (LEFT SIDE ONLY) FIGURE 3 (Left transmission shown) STEP 5: Check to make sure that all installation steps have been completed, and that all hardware is securely tightened. Be sure to move the motion control levers back to the neutral lock positions, and lowe