ملخص المحتوى في الصفحة رقم 1
Operator Manual
ZM4619 / 966564101
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
ملخص المحتوى في الصفحة رقم 2
T o implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty . Do not modify or install non-standard equipment to the unit without consent from the manufacturer . Modifications to the unit may cause unsafe operations or damage the unit. When this product is worn out and no longer
ملخص المحتوى في الصفحة رقم 3
TABLE OF CONTENTS INTRODUCTION ........................................................5 Running ...............................................................29 Driving and Transport on Public Roads ................5 Operating On Hills ...............................................30 Towing ...................................................................5 Mowing Tips ........................................................31 Operating .......................................................
ملخص المحتوى في الصفحة رقم 4
W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower . Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit che
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION Congratulations T owing Thank you for purchasing a McCulloch ride-on If machine is equipped with a tow hitch, use extreme mower. This machine is built for superior efficiency caution when towing. Never allow children or others in to rapidly mow primarily large areas. A control panel or on the towed equipment. Make wide turns to avoid easily accessible to the operator and a hydrostatic jack-knifing. Travel slowly and allow extra distance to transmission regulated by steering cont
ملخص المحتوى في الصفحة رقم 6
INTRODUCTION Good Service McCulloch's products are sold only in specialized your retailer. See the certificate in the Service Journal retail stores with complete service. This ensures that in this operator’s manual. you as a customer receive only the best support and When you need spare parts or support in service service. Before the product is delivered, the machine questions, warranty issues, etc., please consult has, for example, been inspected and adjusted by the following profession
ملخص المحتوى في الصفحة رقم 7
SymBOLS AND DECALS These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. W ARNING! IMPORT ANT INFORMA TION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. xxxxxx. Used in this publication to notify the reader of a risk Used in this publication to notify the reader of a risk of material damage, particularly if the reader shoul
ملخص المحتوى في الصفحة رقم 8
SymBOLS AND DECALS Read Shut off engine and Keep a safe Use on slopes No passengers Operator’s remove key before distance from no greater Manual performing any the machine than 10° maintenance or repair work Whole body Severing of fingers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for other forward, watch for thrown objects shields while people other people engine is running Moving sharp blades under cover 8
ملخص المحتوى في الصفحة رقم 9
SAFETy Safety Instructions These instructions are for your safety. Read them carefully. W ARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety . IMPORT ANT : THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manual before
ملخص المحتوى في الصفحة رقم 10
SAFETy • Watch for traffic when operating near or crossing roadways. • Use extra care when loading or unloading the machine into a trailer or truck. • Always wear eye protection when operating machine. • Data indicates that operators age 60 years and above are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury. • Follow the manufacture
ملخص المحتوى في الصفحة رقم 11
SAFETy Personal Safety Equipment W ARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective sh
ملخص المحتوى في الصفحة رقم 12
SAFETy Children Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain out of the path of danger. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Never carry c
ملخص المحتوى في الصفحة رقم 13
SAFETy W ARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. A
ملخص المحتوى في الصفحة رقم 14
SAFETy General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. • If the machine strikes a foreign object, stop and inspect the machine. Repair, if necessary, befo
ملخص المحتوى في الصفحة رقم 15
SAFETy Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery. • Use protective goggles. • Ensure that the fuel filler cap is mounted tightly and no flammable substances are stored in an open vessel. W ARNING! A void electrical sparking and its consequences by the following routi
ملخص المحتوى في الصفحة رقم 16
SAFETy T ransport W ARNING! • The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is Escaping hydraulic oil under loaded on or unloaded from a vehicle or trailer. pressure can have sufficient force to penetrate the skin, causing • Use an approved trailer to transport the machine. serious injury . If injured by escaping Activate the parking brake, turn off the fuel supply, fluid, see a doctor at once. Serious and fasten the machine with approved fasteni
ملخص المحتوى في الصفحة رقم 17
CONTROLS Transmission from the engine is made via two belt- This operator’s manual describes the McCulloch Zero driven hydraulic pumps. Using the left and right Turn Rider. The rider is fitted with a Briggs & Stratton, steering controls, the flow is regulated and thereby the four-stroke overhead valve engine. direction and speed. Control Locations 10 9 1 8 7 6 5 4 3 2 1. Motion Control Levers 6. Blade Switch 2. Seat Adjustment Lever 7. Ignition Switch 3. Lift Lever 8. Bypass Linkage 9. Fuel
ملخص المحتوى في الصفحة رقم 18
CONTROLS Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward o
ملخص المحتوى في الصفحة رقم 19
CONTROLS Seat Adjustment Lever The seat can be adjusted lengthways. Release levers are located at the lower front right, or on the right side—depending on model. When making adjustments, sit on the seat. Slide the lever and maneuver seat to appropriate placement and release lever. IMPORT ANT INFORMA TION Before pushing or towing tractor , transmission must be unlocked and park brake released. The tractor should never be pulled at more than 2 miles per hour (3.2 km/h) or for 8050-852 d
ملخص المحتوى في الصفحة رقم 20
CONTROLS Fuel T ank The machine has one fuel tank, just behind the seat. The tank capacity is 4 gallons (15.1 liters). The engine will run on a minimum of 85-octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used. See also Technical Data concerning ethanol fuel. Methanol fuel is not allowed. When operating below 32°F (0°C) use fresh, clean winter grade gasoline to help insure good cold weather starting. 8058-833 Fuel tank W ARNING! Gasoline is highly
