ملخص المحتوى في الصفحة رقم 1
Table of Contents
Disc Mowers
DM36 Series
327-045M
Operator’s Manual
Read the Operator’s manual entirely. When
you see this symbol, the subsequent
!
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
8/7/2002
© Copyright 2002
Cover photo may show optional equipment not supplied
with standard unit.
ملخص المحتوى في الصفحة رقم 2
Land Pride. Table of Contents Table of Contents Important Safety Information . . . . . . . . . . .1 Section 3 Adjustments . . . . . . . . . . . . . . .16 Be Aware of Signal Words . . . . . . . . . . . . . . . . . . . 1 Transport Lock Operation . . . . . . . . . . . . . . . . . .16 Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Belt Tension Adjustment . . . . . . . . . . . . . . . . . . .17 Cutting Height . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Introduct
ملخص المحتوى في الصفحة رقم 3
ON Land Pride Table of Contents Important Safety Information Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Keep Riders Be Aware of Signal ! WARNING! Indicates a potentially hazardous Off Machinery Words situation which, if not avoided, could Riders obstruct the operator’s A signal word designates a degree or result in death or serious injury, and view, they could be struck by level of hazard seriousness. Th
ملخص المحتوى في الصفحة رقم 4
Land Pride Table of Contents Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Use the following maximum Use Safety Transport speed - tow load weight ratios as Lights and Devices Machinery Safely a guideline: Slow moving tractors, Comply with state and local laws. 20 mph when weight is less than self-propelled equipment, and or equal to the weight of tractor. Maximum transport speed for towed implements c
ملخص المحتوى في الصفحة رقم 5
Land Pride Table of Contents Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Wear Tire Safety Prepare for Emergencies Protective Equipment Tire changing can be dangerous Be prepared if a fire starts. Protective clothing and equipment and should be performed by Keep a first aid kit and fire should be worn. trained personnel using the extinguisher handy. correct tools and equipment. Wear clothing and equipme
ملخص المحتوى في الصفحة رقم 6
Land Pride Table of Contents Important Safety Information the correct safety labels are included in the request. To Safety Labels order new labels go to your Land Pride dealer. Your Mower comes equipped with all safety labels in place. 5. Refer to this section for proper label placement. They were designed to help you safely operate your implement. To install new labels: 1. Read and follow label directions. a. Clean the area the label is to be placed. 2. Keep all safety labels clean and legible.
ملخص المحتوى في الصفحة رقم 7
Land Pride Table of Contents Important Safety Information 20763 818-641C Danger Rotating Blades 20763 818-641C Danger Rotating Blades 20763 818-642C Danger Thrown Object 20763 818-642C Danger Thrown Object 5/5/08 DM36 Series Disc Mowers 327-045M 5
ملخص المحتوى في الصفحة رقم 8
Land Pride Table of Contents Important Safety Information 838-094C 20764 Warning: High Pressure 818-558C Warning General Mower Safety 20763 818-543C 20763 Warning Guard Missing DM36 Series Disc Mowers 327-045M 5/5/08 6
ملخص المحتوى في الصفحة رقم 9
Land Pride Table of Contents Introduction Introduction Land Pride welcomes you to the growing family of new Owner Assistance product owners. The Warranty Registration card should be filled out by the This Disc Mower has been designed with care and built by dealer at the time of purchase. This information is skilled workers using quality materials. Proper assembly, necessary to provide you with quality customer service. maintenance, and safe operating practices will help you If customer service or
ملخص المحتوى في الصفحة رقم 10
Land Pride Table of Contents Section 1 Assembly and Set-Up Section 1 Assembly and Set-Up It is also necessary to check whether the plate turning Tools Required right has right cutter blades and the plate turning left has • Fork lift, crane hoist or block-and-tackle left cutter blades. • Impact wrench or socket and ratchet set (metric) Cutter Bar and Gearbox Lubrication • Rubber mallet The cutter bar should arrive with oil already added. After • Box-end (metric), allen (metric) and crescent wrenc
ملخص المحتوى في الصفحة رقم 11
Land Pride Table of Contents Section 1 Assembly and Set-Up Stroke Control for 3 Pt Disconnect: When disconnecting unit from 3 Pt, lock channel (#11) and spring pin (#23) should be located between spring tube and rod stop. For running applications lock channel (#11) and spring pin (#23) should be stored below rod stop. Spring Tension Adjustment for Spring Assembly (#6): With unit completely assembled and attached to a tractor, level 3 Pt arms on tractor, (make sure the stroke control is in the st
ملخص المحتوى في الصفحة رقم 12
Land Pride Table of Contents Section 1 Assembly and Set-Up Belt Cover and Pulleys Assembly Refer to Figure 1-3: 1. Assemble the inner guard (#11) and the guard reinforcement (#1) to the disc mower with the 3/8” X 1” long bolts (#4) and flat washers (#6). 2. Install pulleys (#8) and (#9) as shown and secure with keys (#2). 3. Install belt (#10) to pulleys. Pulley (#8) may need to be adjusted so pulley can be assembled. Refer to “Belt Tension Adjustment” on page 17. Support Stand Assembly Refer to
ملخص المحتوى في الصفحة رقم 13
Land Pride Table of Contents Section 1 Assembly and Set-Up 5. Assemble shield (#6) to brackets with carriage bolts Cutting Unit Assembly (#14), washers (#24) and lock nut (#22). Refer to Figure 1-5: 6. Assemble the guide (#5) to the cutting unit with the 1. Install the support frame (#2) to the gearbox using the 1/2” X 3 1/2” long bolt (#11), flat washer (#27) and lock M16 bolts (#18) and lock washers (#29). nut (#23). Place the spring (#33) between the guide 2. Assemble the blade bar support (#4
ملخص المحتوى في الصفحة رقم 14
Land Pride Table of Contents Section 2 Operating Section 2 Operating 6. If necessary use the adjustment on the lower 3-point Attaching the Tractor arms of the tractor to make sure that the mower is 1. Back the tractor up to the disc mower so that the lower level. draft arms are aligned with the lower lift pins of the 7. Raise the support leg and position it in the high disc mower. Connect 3-point upper link. Connect to position. lower 3-point arms with proper attaching hardware. 8. With the disc
ملخص المحتوى في الصفحة رقم 15
Land Pride Table of Contents Section 2 Operating Transporting Operating Checklist ! CAUTION When traveling on public roads at night or during the day, use ✔ Check Reference accessory lights and devices for adequate warning to operator's Safety Rules Page 1 of other vehicles. Comply with all federal, state and local laws. Operating Instructions This section IMPORTANT: Always disengage the tractor’s PTO Check oil level in gearbox and cutter bar. Page 18 before raising the mower to transport positi
ملخص المحتوى في الصفحة رقم 16
Land Pride Table of Contents Section 2 Operating possibility of foreign objects being deflected by the cutting Working Position blades. 1. Tilt the angle of the cutter bar back towards the ! WARNING horizontal position by lengthening top link to raise the Before lowering cutter bar, make sure no one is within 20 feet of cutting height of the knives. mower. 2. Reduce the forward speed. 1. Lower mower using the tractor lift. 3. Make sure the cutting blades can pivot if an obstruction is hit. 2. Ret
ملخص المحتوى في الصفحة رقم 17
Land Pride Table of Contents Section 2 Operating If you do hit an object when you are mowing, immediately Operating Instructions disengage the PTO, idle the engine, stop the tractor, wait By now you should have thoroughly read your Disc Mower for all moving parts to come to a complete stop, shut off Operator’s Manual, properly attached your Land Pride the tractor, set the brake, remove the keys, and inspect for Disc Mower to your tractor, and reviewed the Operating damage. If damage is present,
ملخص المحتوى في الصفحة رقم 18
Land Pride Table of Contents Section 3 Adjustments Section 3 Adjustments Transport Lock Operation ! DANGER The transport lock is designed so that the operator does Before making any adjustments to this machine, disengage not need to get off the tractor from field operation retract PTO, shut off tractor, remove ignition key and wait for all the hydraulic cylinder until lock engages. From transport moving parts to stop. Disconnect the PTO driveline. position pull rope and extend the cylinder until
ملخص المحتوى في الصفحة رقم 19
Land Pride Table of Contents Section 3 Adjustments Belt Tension Adjustment Belt must be properly tensioned at all times to avoid Midpoint excessive flopping and slipping. Loose belt will also cause poor cutting and premature wear. Check tightness of the belt regularly, especially when working the first few hours. Always retighten or check belt after 4-8 hours of operation. Refer to Figure 2-2. 1. Loosen main pivot bolt. 2. Tighten nut on the belt tension bolt until you have a 3/4” deflection midpoi
ملخص المحتوى في الصفحة رقم 20
Land Pride Table of Contents Section 4 Maintenance and Lubrication Section 4 Maintenance and Lubrication General Maintenance ! Proper servicing and adjustment is the key to the long life CAUTION When changing blades, always replace the blade bolt & blade of any farm implement. With careful and systematic nut together at the same time. Worn or damaged blade bolts or inspection, you can avoid costly maintenance, time and nuts could fail in a hazardous manner that could cause injury. repair. Blade
