ملخص المحتوى في الصفحة رقم 1
OPERATOR’S
MANUAL
IS3100Z Series
Zero-Turn Riding Mower
Zero-Turn Rider & Mower Deck Zero-Turn Rider
Model No.: Description Model No.: Description
5900784 IS3100ZLKAV2661 5900787 IS3100ZBV32
5900788 IS3100ZBV3061 5900792 IS3100ZBV32AUS/NZ
5900786 IS3100ZBV3261 5900795 IS3100ZKAV37SS
5900791 IS3100ZBV32/61 AUS/NZ 5900873 IS3100ZKAV37SS DFI
5900793 IS3100ZBV3261CAL 5900970 IS3100ZKAV37
5900794 IS3100ZKAV3761SS 5900300 IS3100ZBV36
5900872 IS3100ZKAV3761SS DFI
5900969 IS3100ZKA
ملخص المحتوى في الصفحة رقم 2
Thank you for purchasing this quality-built FERRIS PRODUCT REFERENCE DATA product. We’re pleased that you’ve placed your Unit Model Number Unit SERIAL Number confidence in the FERRIS brand. When operated and maintained according to the instructions in this manual, your FERRIS product will provide many years of dependable service. Mower Deck Model Number Mower Deck SERIAL Number This manual contains safety information to make you aware of the hazards and risks associated with Dealer Name
ملخص المحتوى في الصفحة رقم 3
Table of Contents Troubleshooting, Adjustments & Service ...... 33 Operator Safety .................................................. 2 Troubleshooting the Rider ....................................33 Identification Numbers ..........................................11 Troubleshooting the Mower ..................................34 Safety Alert Symbol and Signal Words .................11 Troubleshooting Common Cutting Problems ........35 Safety Icons ...............................................
ملخص المحتوى في الصفحة رقم 4
Operator Safety Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety. Do not operate this machine unless you have been trained. Reading and understanding this operator’s manual is a way to train yourself. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you are respon
ملخص المحتوى في الصفحة رقم 5
Operator Safety Slope Operation Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollover. You should not operate on a slope greater than a 5.4 foot rise over a 20 foot length (15 degrees). Always mow across slopes, not up and down (to maintain traction on the wheels) and avoid sudden turns or rapid speed changes. Reduce speed and use ext
ملخص المحتوى في الصفحة رقم 6
Operator Safety Roll Bar Use Keep the roll bar in the raised position and fasten the seat belt. There is no roll over protection when the roll bar is down! Do not jump off if the mower tips (it is safer to be secured by the seat belt with the roll bar raised.) Lower the roll bar only when necessary (such as to temporarily clear a low overhanging obstacle) and NEVER remove it. Do NOT use the seat belt when the roll bar is down. Raise the roll bar as soon as clearance permits. Retaining
ملخص المحتوى في الصفحة رقم 7
Operator Safety Fuel and Maintenance Always disengage all drives, shutoff the engine, and remove the key before doing any cleaning, refueling, or servicing. Gasoline and its vapors are extremely flammable. Do not smoke while operating or refueling. Do not add fuel while engine is hot or running. Allow engine to cool for at least 3 minutes prior to adding fuel. Do not add fuel indoors, in an enclosed trailer, garage, or any other enclosed area that is not well ventilated. Gasoline spills
ملخص المحتوى في الصفحة رقم 8
Operator Safety Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. 2. Mow only in the daylight or with good artificial TRAINING light, keeping away from holes and
ملخص المحتوى في الصفحة رقم 9
Operator Safety 23. Use care when approaching blind corners, shrubs, 5. Use extra care with grass catchers or other trees or other objects that may obscure vision. attachments. These can change the stability of 24. To reduce fire hazard, keep unit free of grass, the unit. leaves & excess oil. Do not stop or park over dry 6. Keep all movement on the slopes slow and leaves, grass or combustible materials. gradual. Do not make sudden changes in speed or direction. 7. See your authorize
ملخص المحتوى في الصفحة رقم 10
Operator Safety where there is an open flame, such as in a water EMISSIONS heater. Allow unit to cool before storing. 1. Engine exhaust from this product contains 5. Shut off fuel while storing or transporting. Do not chemicals known, in certain quantities, to cause store fuel near flames or drain indoors. cancer, birth defects, or other reproductive harm. 6. Keep all hardware, especially blade attachment 2. Look for the relevant Emissions Durability Period bolts, tight and keep all
ملخص المحتوى في الصفحة رقم 11
Operator Safety leaks. Make sure all hydraulic fluid connections To maintain operator roll over protection and roll bar are tight and all hydraulic hoses and lines are in effectiveness: good condition before applying pressure to the � If a ROLL BAR becomes damaged for any reason, system. If leaks occur, have the unit serviced such as a collision, roll over or impact, the ROLL immediately by your authorized dealer. BAR must be replaced. Small undetectable 26. WARNING: Stored energy de
ملخص المحتوى في الصفحة رقم 12
Operator Safety INSPECT BUCKLE WARNING & LATCH Failure to properly inspect and maintain the seat belt can cause serious injury or death. INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT � The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation, INSPECT WEBBING modifications, or a roll over. If the seat belt does not pass all of the following tests, it should be repl
ملخص المحتوى في الصفحة رقم 13
SAMPLE SAMPLE Operator Safety Identification Numbers CAUTION or NOTICE These messages presented without the alert symbol indicate a situation where the unit or property could be damaged. Safety Icons All Models A B C D When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers. E F G H Record your model/serial number and engine serial numbers on the space provided for easy access. These numbers can be found in the locations shown. NOT
ملخص المحتوى في الصفحة رقم 14
Operator Safety Safety Decal Location Before operating your unit, read the safety decals. A The cautions and warnings are for your safety. To avoid a personal injury or damage to the unit, understand and follow all safety decals. WARNING If any safety decals become worn or damaged, B C and cannot be read, order replacment decals from your local dealer. D E A C F C B B D * D * G ** G ** G F E * Located near the hydraulic pump fans. ** Located on the frame of the unit behind the
ملخص المحتوى في الصفحة رقم 15
Operator Safety Safety Interlock System This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly. Operational SAFETY Checks Test 1 — Engine should NOT crank if: � PTO switch is engaged, OR � Parking brake is not engaged, OR � Motion control handles are not in the NEUTRAL position, OR � Operator is not on the seat. Test 2 — Engine
ملخص المحتوى في الصفحة رقم 16
Features & Controls Features and Controls A Control Functions The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Ground Speed Levers Seat Adjustment Lever These levers control the ground speed of the rider. The seat can be adjusted forward and back.
ملخص المحتوى في الصفحة رقم 17
Features & Controls PTO (Power Take Off) Switch Fuel Tank Cap The PTO switch engages and disengages the mower. To remove the cap, turn counterclockwise. Pull UP on the switch to engage the mower, and push DOWN to disengage the mower. Fuel Level Gauge Displays the fuel level in the tank. Throttle Control Moving the throttle control fully forward is FULL throttle position. Always operate the unit at FULL Water Temperature Gauge throttle when mowing. (Liquid Cooled Model only) Measures th
ملخص المحتوى في الصفحة رقم 18
Operation Checks Before Starting Operation � Check that crankcase is filled to full mark on General Operating Safety dipstick. See the engine Operator’s Manual for instructions and oil recommendations. Before first time operation: � Make sure all nuts, bolts, screws and pins are in � Be sure to read all information in the Safety and place and tight. Operation sections before attempting to operate � Adjust the seat position, and make certain you can this tractor and mower. reach all con
ملخص المحتوى في الصفحة رقم 19
Operation Pushing the Rider by Hand WARNING If you do not understand how a specific control DO NOT TOW RIDER functions, or have not yet thoroughly read the Towing the unit will cause hydraulic pump FEATURES & CONTROLS section, do so now. and wheel motor damage. Do not use another vehicle to push or pull this unit. Do NOT attempt to operate the tractor without first becoming familiar with the location and function of ALL controls. 1. Disengage the PTO, engage the parking brake, turn the
ملخص المحتوى في الصفحة رقم 20
Operation Smooth Travel Zero-Turn Driving Practice The lever controls of The lever controls of the Zero Turn rider are the Zero Turn rider are responsive, and learning to gain a smooth and responsive. efficient control of the rider’s forward, reverse, and turning movements will take some practice. The BEST method of handling the ground Spending some time going through the maneuvers speed control levers shown and becoming familiar with how the unit is in three steps — as accelerates,
