Dixon TECHNICAL DATA BROCHURE ZTR 361 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DIXON INDUSTRIES, INC. A
BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK PO BOX
1569
COFFEYVILLE KS 673370945
3162512000
FAX 316 251 4117

TECHNICAL DATA BROCHURE ZTR
Model 361
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 39,34 from
transaxle backing plate, raise and push body
and seat assembly forward.
2. Loosen four seat adjustment knobs
P/N 1849 and slide seat forward or backward to
desired p

ملخص المحتوى في الصفحة رقم 2

BODY REMOVAL 1. The 361 has a two -piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases. It may be necessary to remove the upper body to service the transaxle. 2. To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N.4761 at plug-in. 3. Reverse above procedure to reinstall. ADJUSTMENT OF MOWER DECK DRIVE BELT Belt tension is controlled and adjus

ملخص المحتوى في الصفحة رقم 3

MOWER BLADE OPERATION 1. To start mower blades, pull up slightly on blade drive switch handle and move it forward to the "ON" position. 2. To stop mower blades, move switch handle to the "OFF" position SAFETY CHECKS IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should NOT start. If engine does start, return the mower to an Authorized Dixon dealer for a

ملخص المحتوى في الصفحة رقم 4

ملخص المحتوى في الصفحة رقم 5

361 CHASSIS ASSEMBLY

ملخص المحتوى في الصفحة رقم 6

ملخص المحتوى في الصفحة رقم 7

361 MOWER DECK ASSEMBLY 36'

ملخص المحتوى في الصفحة رقم 8