ملخص المحتوى في الصفحة رقم 1
®
GPSMAP 4000/5000 Series
owner’s manual
ملخص المحتوى في الصفحة رقم 2
© 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. Garmin (Europe) Ltd. Garmin Corporation 1200 East 151st Street, Liberty House No. 68, Jangshu 2nd Road, Olathe, Kansas 66062, USA Hounsdown Business Park, Shijr, Taipei County, Taiwan Tel. (913) 397.8200 or (800) Southampton, Hampshire, SO40 9RB UK Tel. 886/2.2642.9199 800.1020 Tel. +44 (0) 870.8501241 (outside the UK) Fax 886/2.2642.9099 Fax (913) 397.8282 0808 2380000 (within the UK) Fax +44 (0) 870.8501251 All rights
ملخص المحتوى في الصفحة رقم 3
Introduction Introduction This manual includes information for the following products: ® • GPSMAP 4008 ® • GPSMAP 4010 ® • GPSMAP 4012 ® • GPSMAP 5008 ® • GPSMAP 5012 ® • GPSMAP 5015 Tips and Shortcuts • Press or touch HOME from any screen to return to the Home screen. • Press or touch MENU from any main screen to access additional settings. • Press and release the Power key to adjust the display settings. • Press and hold the Power key to turn the unit on or off. Manual Conventions In this ma
ملخص المحتوى في الصفحة رقم 4
Introduction Viewing Engine Gauges .............................27 Table of Contents Viewing Fuel Gauges .................................27 Introduction ................................................i Viewing Video .............................................28 Tips and Shortcuts .........................................i Configuring the Chartplotter .................29 Manual Conventions ......................................i Configuring System Settings ......................29 Quick Links
ملخص المحتوى في الصفحة رقم 5
GG S Getting Started Getting Started artedt ettin Unit Overview Automatic backlight sensor Soft keys POWER RANGE (+/-) ROCKER MARK SELECT MENU HOME Numeric keypad (GPSMAP 400 and 402) SD card slot GPSMAP 4012 NOtE: Use the soft keys to select menu items on the GPSMAP 4000 Series. Touch menu items on the GPSMAP 5000 Series screen to select them. POWER Automatic backlight sensor SD card slot GPSMAP 5008 ® GPSMAP 4000/5000 Series Owner’s Manual
ملخص المحتوى في الصفحة رقم 6
Getting Started Power NMEA 2000 connector connector ettin t arted Marine video Garmin Marine connector Network connectors NMEA 083 connector Turning the Unit On or Off To turn the unit on, press and release the Power key. When the Warning screen appears, select I Agree to open the Home screen. NOtE: The first time you turn on your unit, you must go through a setup sequence. See page 44. To turn the unit off, press and hold the Power key. Warning Screen Home Screen Adjusting the Backli
ملخص المحتوى في الصفحة رقم 7
GG S Getting Started To adjust the color mode: tarted ettin 1. Press and release the Power key. 2. Select Color Mode. 3. Select Day Colors, Night Colors, or Auto. Acquiring GPS Satellite Signals When you turn the unit on, the GPS receiver must collect satellite data and establish its current location. When the unit acquires satellite signals, the signal strength bars at the top of the Home screen are green . When the unit loses satellite signals, the green bars disappear and the position i
ملخص المحتوى في الصفحة رقم 8
Getting Started Using the Simulator Mode Simulator Mode turns the GPS receiver off for use indoors or for practice. The unit does not track satellites in simulator mode. ettin t arted CAUtION: Do not try to navigate using Simulator Mode because the GPS receiver is turned off. Any satellite signal strength bars shown are only simulations and do not represent the strength of actual satellite signals. To turn the Simulator Mode on: 1. From the Home screen, select Configure > System > Simulator
ملخص المحتوى في الصفحة رقم 9
USG CS Using Charts Using Charts ® Your unit has a basic worldwide imagery map. By purchasing an optional Blue Chart g2 Vision™ preprogrammed SD card, you can view detailed information for your region, including: • Navigation Chart—displays navigation data, including buoys, lights, cables, depth soundings, hart marinas, and tide stations in an overhead view. in • Mariner’s Eye and Mariner’s Eye 3D—displays a view from above and behind your boat for a visual navigation aid. • Fishing Chart—re
ملخص المحتوى في الصفحة رقم 10
Using Charts Other features common to most charts include depth contour lines (with deep water represented in white), intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols, and obstructions and cable areas. Navigating to a Point on the Chart 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, or Radar Overlay. in hart 3. Select the point on the chart where you want to go. 4. Select Navigate To. 5. Select Go To (
ملخص المحتوى في الصفحة رقم 11
USG CS Using Charts As you pan the map, a list of options appears along the right side. The options change as you move the map pointer over various objects and charts. • Review—(Review will not appear if the pointer is not near an object—if the pointer is near only one object, the name of the object appears.) This allows you to view details of objects in the vicinity of the pointer. When you select Review, you are presented with a list of all the objects hart near the pointer. in • Navigat
ملخص المحتوى في الصفحة رقم 12
Using Charts Using Mariner’s Eye Mariner’s Eye provides a view from above and behind the boat (according to your course), and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is beneficial when trying to identify entry routes and exit routes in unfamiliar harbors or anchorages. To access the Mariner’s Eye screen, from the Home screen, select Charts > Mariner’s Eye. in hart Press the RANGE (+) key (GPSMAP 4000 series) or tou
ملخص المحتوى في الصفحة رقم 13
USG CS Using Charts Changing the Chart Settings To change chart settings from the Home screen, select Charts > Chart Setup. Orientation—changes the perspective of the map display: • North Up—sets the top of the map display to a north heading. hart • Track Up—sets the map display to the current track heading. in • Course Up—sets the map so the direction of navigation is always up. The heading line appears vertically on the screen if shown. Heading line Track Chart border Heading Line—draws an e
ملخص المحتوى في الصفحة رقم 14
Using Charts Using Tracks A track is a recording of your path. The track currently being recorded is the active track. An active track can be saved. To turn the track log on: From the Navigation chart, select Menu > Chart Setup > Tracks > On. A trailing line on the chart indicates your track. in hart To save the active track: 1. From the Home screen, select Information > User Data > Tracks > Save Active Track. 2. Select either the time the current track began (or Midnight, if shown) or Entire
ملخص المحتوى في الصفحة رقم 15
USG CS Using Charts 3. Select Edit Track to change the name or color of the track or select Delete to delete it. Select Next Page to view the track on the navigation chart. To set active Track Options: From the Home screen, select Information > User Data > Tracks > Active Track Options. Record Mode—select Off, Fill, or Wrap. hart in • Off—does not record a track log. • Fill—records a track log until the track memory is full. • Wrap—continuously records the track log, replacing the oldest track
ملخص المحتوى في الصفحة رقم 16
Using Charts Using Mariner’s Eye 3D A BlueChart g2 Vision SD card offers Mariner’s Eye 3D, which provides a detailed three- dimensional view from above and behind the boat (according to your course), and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is beneficial when trying to identify entry and exit routes in unfamiliar harbors or anchorages. in hart Mariner’s Eye 3D Navigation Chart Press the RANGE (+) key (GPSMAP 400
ملخص المحتوى في الصفحة رقم 17
USG CS Using Charts Using Fish Eye 3D Using the depth contour lines of the BlueChart g2 Vision cartography, Fish Eye 3D provides an underwater view of the sea floor or lake bottom. Use the RANGE keys (GPSMAP 4000 series) or the and keys (GPSMAP 5000 series) to adjust the view. hart in Fish Eye 3D Fish Eye 3D Settings To access additional settings or options for the Fish Eye 3D screen, press MENU. Sonar Cone—turns a cone on or off that shows the area covered by your transducer. Sonar Data—vi
ملخص المحتوى في الصفحة رقم 18
Using Charts Enabling High-Resolution Satellite Imagery You can overlay high-resolution satellite images on the land, the sea, or both portions of the Navigation chart when using a preprogrammed BlueChart g2 Vision SD card. To enable satellite imagery: 1. While viewing the Navigation Chart, press MENU. 2. Select Chart Setup > Appearance > Photos. in hart 3. Select one of the following: • Off—standard chart information is shown on the map. • Land Only—standard chart information is shown on wate
ملخص المحتوى في الصفحة رقم 19
USG CS Using Charts Viewing Aerial Photos Preprogrammed BlueChart g2 Vision SD cards contain aerial photographs of many landmarks, marinas, and harbors. Use these photos to help orient yourself to your surroundings or to acquaint yourself with a marina or harbor prior to arrival. hart in NOtE: Use the RANGE (+/-) keys (GPSMAP 4000 series) or touch the and keys (GPSMAP 5000 series) to zoom in and out while viewing the aerial photo on the full screen. To access aerial photos from the naviga
ملخص المحتوى في الصفحة رقم 20
Using Combinations Using Combinations Use the Combinations screen to view a combination of different screens at the same time. The number of options available on the Combinations screen depends on the optional network devices you have connected to your chartplotter, and whether you are using an optional BlueChart g2 Vision SD card. You can combine two or three screens (GPSMAP 4000 series) or up to four screens (GPSMAP 5000 series). To access the Combinations screen from the Home screen, sele
