Furuno GP-185F دليل المستخدم

ملخص المحتوى في الصفحة رقم 4

Manual Sounder Suppressing Low Level Operation Noise 1. On the normal or dual-frequency display, 1. Press the [MENU] key, and then press the press the soft key MODE/FREQ. When the soft key SOUNDER SETUP OPTIONS to plotter/sounder display is displayed, press the show the sounder setup menu. soft key SNDR, and then press the soft key 2. Press or to select CLUTTER. MODE/FREQ. 3. Press the soft key EDIT. 2. Select MANUAL. 4. Press or to select clutter rejection level. 3. Press the soft key R

ملخص المحتوى في الصفحة رقم 1

COLOR DGPS/PLOTTER/SOUNDER GP-1850DF
COLOR GPS/PLOTTER/SOUNDER GP-1850F
Operator’s Guide
The purpose of this operator's guide is to provide the basic operating procedures for this equipment.
For detailed information, refer to the operator's manual.
Turning the Power On/Off Displaying Electronic
Chart at Power Up
Press and hold down the [POWER/BRILL]
switch.
Insert mini chart card in slot and turn on the
power.
Adjusting Tone and
Brilliance Selecting Nav Data
Displays
1. Press the [POWER/BRILL]

ملخص المحتوى في الصفحة رقم 2

Returning Own Ship to Stopping, Restarting Screen Center Recording of Track Press the soft key CENTER. 1. Press the [MENU] key. 2. Press the soft key CHART SETUP OP- TIONS. Changing the Plot Interval 3. Press the soft key TRACK CONTROL. 4. Press the soft key STOP TRACK. NOT 1. Press the [MENU] key to show the main TRACKING indication appears at the bottom menu. of the display. 2. Press the soft key CHART SETUP OPTIONS To restart recording, press the soft key START to show the chart setup options

ملخص المحتوى في الصفحة رقم 3

♦SOUNDER♦ Setting Destination by Functions for Waypoint Number soft key Variable Range Nav information Marker 1. Place the cursor on the waypoint you want window (White) Depth scale to go on the plotter display. CSE 245.8° 34° 12.345’ N SOUNDER 135° 12.345’ E SPD 16.3kt 2. Press the soft key GO TO WPT. RANGE Color 30 20 bar GAIN Cancelling Destination 20 Temp. 30 scale SHIFT 10 Water 40 1. Press the [WPT/RTE] key. MODE/ temp. FREQ 0 graph 2. Press the soft key LOG. 50 54.0m SNDR Water