Gamber Johnson 7160-0486 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
Product Revision Form
INST-596
7160-0486, 7160-0487
Rev .B
Printing Spec: PS-001
FZ-G1 DOCKING STATION
This instruction sheet is for the FZ-G1 docking station only. For instructions on
features, set-up, and operation of the FZ-G1 computer, please refer to the
manual provided by Panasonic with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson
mounting systems. Installation instructions for other Gamber-Johnson products
are

ملخص المحتوى في الصفحة رقم 2

PRE-INSTALLATION RECOMMENDATOINS Conduct a "Bench Test" Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation: 1. Make sure the computer is operational by itself. 2. Insert computer into the docking station and verify that the computer is operating in the dock. 3. Interconnect entire assembly and verify start-up of all components, including other equipment (printers, modems, scanners, etc.) Gamber-Johnson re

ملخص المحتوى في الصفحة رقم 3

FZ-G1 DOCKING STATION FEATURE IDENTIFICATON Button Latch Top Hooks (Keyed alike, or Keyed different) Slide Plate Base Guide Block (Can be removed for use with FZ-G1 that has an extended battery or card slot attachment) Alignment Tabs Dual RF Output Dual RF Connector Docking Connector Ground Pins Cable Tie Openings Serial Video RF Switch - move to outside position for External RF Antenna 4X Mounting Studs (1/4-20unc for model 7160-0486) (M6-1.0 for model 7160-0487) 15.6 Vdc Input (2) USB Ethe

ملخص المحتوى في الصفحة رقم 4

DOCKING AND UNDOCKING THE COMPUTER Figure 1 1. Turn the computer off. Vertical Walls 2. With the slide plate in the open position, insert the bottom of the Guide Block computer into the docking station. Make sure the guide tabs are lined up with the pockets on the back side of Guide tabs the computer. Rotate the top of the comptuter under the top hooks until the computer is resting on the two vertical walls sticking Figure 2 out from the slide plate. (see Figues 1, 2 & 3) (Note:

ملخص المحتوى في الصفحة رقم 5

Regulatory Certification Information Regulatory Model #: 7160-0486 GJ Model #'s: 7160-0486-00, 7160-0486-02, 7160-0486-03, 7160-0486-04 7160-0486-00-P, 7160-0486-02-P, 7160-0486-03-P, 7160-0486-04-P 7160-0487-00, 7160-0487-02, 7160-0487-03, 7160-0487-04 7160-0487-00-E, 7160-0487-02-E, 7160-0487-03-E, 7160-0487-04-E Descriptions: Dock-Panasonic-FZG1 Certifications: • EN 55022:2010 CISPR 22:2008 Class B • EN 50498:2010 • EN 50581:2012 • IEC 60950-1:/A1:2009 • EN 60950-1/A12:2011 • CAN/CSA