ملخص المحتوى في الصفحة رقم 1
TOSHIBA Satellite A210/
Satellite Pro A210
Portable Personal Computer
User’s Manual
ملخص المحتوى في الصفحة رقم 2
Copyright © 2007 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA Satellite A210/Satellite Pro A210 Portable Personal Computer User’s Manual First edition August 2007 Copyright authority for music, movies, computer programs, data bases and other intellectual property covered by
ملخص المحتوى في الصفحة رقم 3
Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. DVD MovieFactory is trademarks of the Ulead Systems. Inc. Labelflash™ is a trademark of YAMAHA CORPORATION. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,
ملخص المحتوى في الصفحة رقم 4
resulting excessive current follow can cause extremely high temperatures and may result in damage from burns. ❑ Be sure that noting rests on your AC adapter’s power cable and that the cable is not located where it can be tripped over or stepped on. ❑ Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the A
ملخص المحتوى في الصفحة رقم 5
mined by turning the equipment off and on, the user is encouraged to try to cor- rect the interference by one or more of the following measures: ❑ Reorient or relocate the receiving antenna. ❑ Increase the separation between the equipment and receiver. ❑ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ❑ Consult the dealer or an experienced radio/TV technician for help.. Only peripherals complying with the FCC class B limits may be attac
ملخص المحتوى في الصفحة رقم 6
BSMI Notice (Taiwan Only) EU Declaration of Conformity Supplementary Information: “The product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/5/EC.” This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information Canadian Regulatory Information (Canada Only) This digital ap
ملخص المحتوى في الصفحة رقم 7
Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouileur du Canada. Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assur- ance of successful o
ملخص المحتوى في الصفحة رقم 8
Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial attempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experiencing problems with the Black Listed code, set the interval between redials at one minute or
ملخص المحتوى في الصفحة رقم 9
systems) is prohibited. Connection to party lines service is subject to state tariffs. If you have any questions about your telephone line, such as how many pieces of equipment you can connect to it, the telephone company will provide this infor- mation upon request. Telephone company procedures The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations, or pro
ملخص المحتوى في الصفحة رقم 10
Instructions for IC CS-03 certified equipment 1 The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protec- tive, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to
ملخص المحتوى في الصفحة رقم 11
Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure com- pliance with Austel standards when the country/region selection is set to Austra- lia. The use of other country/region setting while the modem is attached to the Australian PSTN would result in you modem being operated in a non-compliant manner. To verify that t
ملخص المحتوى في الصفحة رقم 12
❑ Some parameters required for compliance with Telecom’s PTC Specifica- tions are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: (a) There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and (b) The equipment shall go on-hook for a period of not less than 30 seconds between the end of
ملخص المحتوى في الصفحة رقم 13
❑ The transmit level from this device is set at a fixed level and because of this there may be circumstances where the performance is less than optimal. Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone perfor- mance is impaired. ❑ It is recommended that this equipment be disconnected from the Telecom line during electrical storms. ❑ When relocating the equipment, always disconnect the Telecom line
ملخص المحتوى في الصفحة رقم 14
Following information is only for EU-member states: The symbol indicates that this product may not be treated as household waste. Please ensure this product is properly disposed as inappropriate waste handling of this product may cause potential hazards to the environment and human health. For more detailed information about recycling of this product, please contact your local city office, your house- hold waste disposal service or the shop where you pur- chased the product. This symbol may
ملخص المحتوى في الصفحة رقم 15
Important Notice Copyrighted works including, but not limited to music, video, computer pro- gram, databases are protected by copyright laws. Unless specifically permitted under applicable copyright laws, you cannot copy, modify, assign, transmit or otherwise dispose of any copyrighted work with the consent of the owner of the copyright. Please take notice that unauthorized copying, modification, assign- ment, transmission and disposition may be subject to claims for damages and penalties. ❑
ملخص المحتوى في الصفحة رقم 16
CD-RW/DVD-ROM drive safety instructions ❑ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an autho- rized service location. ❑ Use of controls, adjustments or the performance of proce- dures other than those specified may result in hazardous radi- ation exposure. ❑ To prevent direct exposure to the laser beam, do not try to open the enclosure
ملخص المحتوى في الصفحة رقم 17
TEAC DW-224E Location of the required label CERTIFICATION TISH PRODUCT COMPLIES WITH DHHS RULES21CFR CHAPTER 1, SUBCHAPTER J APPLI- CABLE DATE OF MANUFACTURE MANUFACTURED: TEAC CORPORATION 3-7-3 NAKA-CHO, MUSASHINO-SHI, TOKYO, JAPAN User’s Manual xvii
ملخص المحتوى في الصفحة رقم 18
HD DVD-ROM and HD DVD-R drive safety instructions ❑ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an autho- rized service location. ❑ Use of controls, adjustments or the performance of proce- dures other than those specified may result in hazardous radi- ation exposure. ❑ To prevent direct exposure to the laser beam, do not try to open the
ملخص المحتوى في الصفحة رقم 19
Toshiba SD-L902A Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPAL WITH DHHS RULES 21 CFR CHAPTER1, SUBCHAPTER J. MANUFACTURED: Manufactured by TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO- KU, TOKYO 105-8001, JAPAN User’s Manual xix
ملخص المحتوى في الصفحة رقم 20
DVD Super Multi (+-R DL) drive safety instructions ❑ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an autho- rized service location. ❑ Use of controls, adjustments or the performance of proce- dures other than those specified may result in hazardous radi- ation exposure. ❑ To prevent direct exposure to the laser beam, do not try to open th
