ملخص المحتوى في الصفحة رقم 1
LC8000 Series
Logic Controls Industrial Computer
USER MANUAL
ملخص المحتوى في الصفحة رقم 2
NOTICE The manufacturer of the Industrial Computer makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages. Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. FCC NOTICE This device complies with Par
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Save these instructions for future reference. 1. Follow all warnings and instructions marked on the product. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use this product near water. 4. This product should be operated from the type of power indicated on the power adaptor. If you are not sure of the type of power avail
ملخص المحتوى في الصفحة رقم 4
TABLE OF CONTENTS FEATURES…………………………………………………………............. 5 OVERVIEW…………………………………………………….................... 6 HARDWARE CONNECTIONS……………………………………………. 7 TURNING ON YOUR COMPUTER ……………………………………… 8 TROUBLESHOOTING……………………………………………….......... 9 BOOTING FROM INTERNAL/EXTERNAL DEVICES….………………. 9 SPECIFICATIONS................................................................................. 11 4 LC8000 User Manual Rev. 1
ملخص المحتوى في الصفحة رقم 5
FEATURES • Fanless operation • Intel-compatible CPU 533 MHz to 1 GHz • Ultra compact – only 2”H x 8”W x 6”L • Mass storage: Compact flash (no moving parts) or/and hard disk drive • Enclosed in rugged die cast case • 128MB to 512MB embedded RAM • No internal connecting cables with all components mounted on single PC board for high reliability • Large number of available I/O ports: 4 USB 2.0, 4 serial, 2 SVGA, 1 Ethernet, 1 PS/2 keyboard/mouse, 1 LPT, speaker out, microphone in, power
ملخص المحتوى في الصفحة رقم 6
OVERVIEW The Logic Controls LC8000 provides unparalleled reliability by being a fanless unit with no moving mechanical parts. It is an ideal computer for use in harsh environments with high levels of dust or oil when fan noise is not desirable. For mass storage, compact flash memory provides true no-moving-part operation. In addition, all components and connectors reside on one PC board, thus no internal cables (sources of common loose connections) are required. The computer is housed in
ملخص المحتوى في الصفحة رقم 7
HARDWARE INSTALLATION } Optional Equipment As it’s a fan-less computer, adequate ventilation is required to ensure normal operation. Allow at least 6 inches of space from the top of the unit and 3 inches from the sides to allow proper ventilation. 7 LC8000 User Manual Rev. 1
ملخص المحتوى في الصفحة رقم 8
TURNING ON YOUR COMPUTER 1. Connect keyboard, mouse, or other interface device. 2. Turn on all peripherals connected to the system such as the monitor, speakers, USB devices, etc. 3. Connect power adaptor to the LC8000 and then plug power cord into wall outlet. (If you have shut down your computer from your operating system, you may restart the computer by using a pen-tip to press the on/off switch on the front panel of the LC8000.) 8 L
ملخص المحتوى في الصفحة رقم 9
TROUBLESHOOTING If you encounter a hardware problem, we recommend that you review the following suggestions before calling for service: General failure • Are all cables securely plugged? • Are all system components and peripherals turned on? • Is the system main power switch on? • Is the power outlet burned out? You may check this by plugging in and turning on another piece of equipment. • Are any cables damaged? Are they properly routed and coiled? Entwined cables may cause signal
ملخص المحتوى في الصفحة رقم 10
3. Use the arrow keys on your keyboard to select Advanced BIOS Features, and press . AMIBIOS NEW SETUP UTILITY – VERSION 3.31a Advanced BIOS Features [ Setup Help ] Quick Boot Enabled Boot Device Priority 1st Disabled 2nd Disabled 3rd Disabled Try Other Boot Devices Yes USB Controller 4 USB Ports USB 1.1 Device Legacy Support Disabled Initial Display Mode BIOS Display Mode at Add-On ROM Init Force BIOS S.M.A.R.T. for Hard Disks Disabled BootUp Num-Lock
ملخص المحتوى في الصفحة رقم 11
SPECIFICATIONS 11 LC8000 User Manual Rev. 1
