ملخص المحتوى في الصفحة رقم 1
Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S6110
Document Date: 10/23/02/02
Document Part Number: FPC58-0794-01
FUJITSU PC CORPORATION
1
ملخص المحتوى في الصفحة رقم 2
LifeBook S Series Notebook BIOS 4. To activate a submenu press the [Enter] key. S Series BIOS 5. To return to a menu from a submenu, press the [Esc] key. BIOS SETUP UTILITY 6. To go to the Exit menu from any other menu, The BIOS Setup Utility is a program that sets up the press the [Esc] key. operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS POINTS environment to operate your notebook
ملخص المحتوى في الصفحة رقم 3
Main Menu 2. If an error message is displayed on the screen, and 3. If an error message is displayed on the screen, and you want to continue with the boot process and start you want to enter the setup utility, press the [F2] key. the operating system anyway, press the [F1] key. 4. When the setup utility starts with a fault present, the system displays the following message: Warning! POINTS Error message ■ If your notebook beeps a series of beeps that sounds [Continue] like a code and the disp
ملخص المحتوى في الصفحة رقم 4
▲ ▲ ▲ LifeBook S Series Notebook BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for Navi- to help understand the field’s use. Note that the actual gating Through The Setup Utility to make any changes. drive labels shown may vary. (See Navigating Through the Setup Utility on page 2 for more information) POINT The following tables show th
ملخص المحتوى في الصفحة رقم 5
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Options Default Description ■ Primary Master: Selects Primary The product # of Display the type of device on this ATA/ATAPI interface, if there is Master submenu the Hard Drive one. Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface. ■ Secondary Master: Selects The product # of Display the type of device on this ATA/ATAPI interface, if there is
ملخص المحتوى في الصفحة رقم 6
▲ LifeBook S Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA Note that actual hard drive label shown may vary. devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Primary Master [TOSHIBA MK4018GAP -(PM)] Item Specific Help Type: [Auto] Select ATA/ATAPI drive Maximum Capacity: 40008MB installed here. Multi-Sector Transfers: [16 S
ملخص المحتوى في الصفحة رقم 7
Main Menu Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description ■ Multi-Sector Disabled [16 Sectors] This option cannot be changed when Auto is selected. Specify the num- ■ Transfers: ber of sectors per block for multiple sector transfer. 2 Sectors ■ 4 Sectors ■ 8 Sectors ■ 16 Sectors ■ 32 Sectors ■ 64 Sectors ■ 128 Sectors ■ LBA Mode Disabled [Enabled] Enables or disables logical Block Addressing in place of Cylinder, Head,
ملخص المحتوى في الصفحة رقم 8
▲ LifeBook S Series Notebook BIOS Secondary Master Submenu of the Main Menu The Secondary Master submenu is for the internal CD- not need to modify these settings; they are displayed for ROM drive. The drive type is displayed on this menu as your reference. well as the Main menu. Your notebook auto-senses the Note that actual drive labels shown may vary. characteristics of the internal drive installed. You will PhoenixBIOS Setup Utility Main Secondary Master [TOSHIBA DVD-ROM SD-R2212-(S
ملخص المحتوى في الصفحة رقم 9
MAin Menu Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description ■ LBA Mode Enabled [Disabled] Enables or disables Logical Block Addressing in place of Cylinder, Head, ■ Control: Sector addressing. This option cannot be changed when Auto is selected. Disabled ■ PIO Transfer Standard [Standard] Selects the method for moving data to/from the drive. Autotype the ■ Mode: drive to select the optimum transfer mode. This option c
ملخص المحتوى في الصفحة رقم 10
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ LifeBook S Series Notebook BIOS ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS ■ The Advanced Menu allows you to: Configure DMI Event Logging. ■ Enable or disable support for Plug & Play operating Follow the instructions for Navigating Through the systems. Setup Utility to make any changes. ■ Set the I/O addresses for the serial and parallel ports. (See Navigating Through the Setup Utility on page 2 for ■ Set the communication mode and Infrared. more information) ■ Set
ملخص المحتوى في الصفحة رقم 11
Advanced Menu Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Options Default Description ■ Plug & Play O/S: No [No] Select Yes if you are using a Plug & Play capable operating system. ■ Select No if you need the BIOS to configure non-boot devices. Yes ■ Protected Device No [No] No: allows Plug & Play operating system to change device system ■ Configurations: settings. Yes Yes: prevents a Plug & Play operating system from changing system settings. *ACPI operating syst
ملخص المحتوى في الصفحة رقم 12
▲ LifeBook S Series Notebook BIOS Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu POINTS provides the ability to set the I/O addresses and ■ interrupt levels for the serial, infrared, and parallel To prevent IRQ and address conflicts, avoid changing the default settings. If you must change the settings, ports of your notebook. you can call 1-800-8Fujitsu for technical assistance. CAUTION ■ The BIOS will warn you of a resource con
ملخص المحتوى في الصفحة رقم 13
Advanced Menu Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description ■ Serial Port: Disabled [Enabled] Configures the serial port using either no configuration (Disabled), a user ■ defined configuration (Enabled), or by allowing the BIOS or OS to choose Enabled ■ the configuration (Auto). Auto ■ I/O Address: 3F8 - 3FF [3F8 - 3FF] Allows user to set the serial port base I/O address when serial port is ■ Enabl
ملخص المحتوى في الصفحة رقم 14
▲ LifeBook S Series Notebook BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. PhoenixBIOS Setup Utility Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [Auto] Selects power-on state Hot Plug: [Enabled] for Numlock. Internal Pointing Device: [Auto Disabled] Initialization on Resume: [Fast] F1 Help Select Item -/Space C
ملخص المحتوى في الصفحة رقم 15
▲ Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display [Internal Flat Panel] Select display terminal. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 7. Video Features Submenu Table 7: Fields, Options and Defaults for the V
ملخص المحتوى في الصفحة رقم 16
▲ LifeBook S Series Notebook BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Internal Device Configurations Item Specific Help [Disabled] IDE Contoller: [Both No IDE ports are LAN Controller: [Auto] enabled. Wireless LAN: [Enabled] [Primary] Only primary IDE port is enabled. [Secondary] Only secondary IDE
ملخص المحتوى في الصفحة رقم 17
▲ ▲ Advanced Menu PCI Configuration Submenu of the Advanced Menu The PCI Configuration submenu allows the user to POINT reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules. The BIOS setting for your communication device is variable depending on your notebook’s configuration. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit PCI Configurations Item Specific Help IRQ Reservation Reserve specific IRQs for
ملخص المحتوى في الصفحة رقم 18
▲ LifeBook S Series Notebook BIOS IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration CAUTION submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ Only IRQ's 9, 10, & 11 can be reserved without conflict. is reserved, the BIOS does not use it for embedded PCI or ISA devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit IRQ Reservation Item Specific Help I
ملخص المحتوى في الصفحة رقم 19
▲ Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features Submenu configures the system processor. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help Select Enhanced SpeedStep(TM) Technology: [Enabled] Intel(TM) SpeedStep(TM) On Battery: [Battery Optimized] Technology enabled or On AC: [Maximum Performance] disabled. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-
ملخص المحتوى في الصفحة رقم 20
▲ LifeBook S Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help USB Floppy Disk: [Enabled] [Disabled] Legacy Floppy Emulation is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Se
