Revolabs Inc.IP 7000 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Revolabs Single Channel System - Polycom IP 7000 Setup Guide
NOTES AND CAUTIONS:


This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a Polycom IP 7000 speakerphone.

1. Connecting the Cables
2. Configuring the IP 7000 speakerphone

The Cisco 7937G is a variant of the Polycom IP 7000 and has the same programming
instructions.


Note: It is important to carefully follow these instructions in order and completely.
Otherw

ملخص المحتوى في الصفحة رقم 2

Connecting the Cables CONNECTING A REVOLABS SINGLE CHANNEL TO THE POLYCOM IP 7000 SPEAKERPHONE 1. Connect the Single Channel System to the SoundStation IP 7000 the left “Audio In” port on the Multi Interface Module using the Revolabs 2.5mm to RCA cable

ملخص المحتوى في الصفحة رقم 3

Configuring the IP 7000 Speakerphone CONFIGURING THE AUDIO MENUS OF THE IP 7000 SPEAKERPHONE 1. Press the MENU button 2. Scroll down to SETTINGS (3) 3. Select BASIC (1) 4. Scroll down to AUDIO (5) 5. Select AUXILIARY AUDIO (2) 6. Select AUX AUDIO IN (1) 7. Verify that OTHER INPUT (2) is active