ملخص المحتوى في الصفحة رقم 1
Hybrid IP-PBX
Installation Manual
Model No. KX-TDA50
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
SD Logo is
KX-TDA50: PSMPR Software File Version 4.0000 or later
a trademark.
Document Version: 2007-04
ملخص المحتوى في الصفحة رقم 2
System Components System Components Table Category Model No. Description Main Unit KX-TDA50 Main Unit CO Line Cards KX-TDA5180 4-Port Analog Trunk Card (LCOT4) KX-TDA5193 4-Port Caller ID Card (CID4) KX-TDA5480 4-Channel VoIP Gateway Card (IP-GW4) Extension Cards KX-TDA5170 4-Port Hybrid Extension Card (HLC4) KX-TDA5171 4-Port Digital Extension Card (DLC4) KX-TDA5172 8-Port Digital Extension Card (DLC8) KX-TDA5173 4-Port Single Line Telephone Extension Card (SLC4) KX-TDA5174 8-Port Single Line T
ملخص المحتوى في الصفحة رقم 3
Incompatible Panasonic Proprietary Telephones The Hybrid IP-PBX does not support the following telephones: KX-T30800 series proprietary telephones and DSS consoles KX-T61600 series proprietary telephones and DSS consoles KX-T123200 series proprietary telephones and DSS consoles Notes *1 For the equipment (e.g., Add-on Key Module, USB Module, Headset ) that can be connected to a particular telephone, refer to the telephone's manual. For other equipment that can be connected to the Hybr
ملخص المحتوى في الصفحة رقم 4
Important Safety Instructions SAFETY REQUIREMENTS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean with a damp cloth. 4. Do not use this product nea
ملخص المحتوى في الصفحة رقم 5
SAVE THESE INSTRUCTIONS Installation Manual 5
ملخص المحتوى في الصفحة رقم 6
Precaution WARNING DO NOT REMOVE SD MEMORY CARD WHILE POWER IS SUPPLIED TO THE HYBRID . IP-PBX Doing so may cause the Hybrid IP-PBX to fail to start when you restart the system. 6 Installation Manual
ملخص المحتوى في الصفحة رقم 7
Keep the unit away from heating appliances and devices that generate electrical noise such as fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the Hybrid IP-PBX. This unit should be kept free of dust, moisture, high temperature (more than 40 °C [104 °F]) and vibration, and should not be exposed to direct sunlight. If you are having problems making calls to outside destinations, follow this procedure to test the CO lines: 1. Disconnect
ملخص المحتوى في الصفحة رقم 8
Password Security Warning to the Administrator or Installer regarding the system password 1. Please provide all system passwords to the customer. 2. To avoid unauthorized access and possible abuse of the Hybrid IP-PBX, keep the passwords secret, and inform the customer of the importance of the passwords, and the possible dangers if they become known to others. 3. The Hybrid IP-PBX has default passwords preset. For security, change these passwords the first time that you program the Hybrid IP-
ملخص المحتوى في الصفحة رقم 9
When you ship the product Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a postage-paid letter, detailing the symptom, to the outside of the carton. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs. Product Service Panasonic Factory Service Centers for this product are listed in the service center directory. Consult your certified Panasonic dealer for detailed instructions. For Futur
ملخص المحتوى في الصفحة رقم 10
Introduction This Installation Manual is designed to serve as an overall technical reference for the Panasonic Hybrid IP- PBX, KX-TDA50. It provides instructions for installing the hardware, and programming the Hybrid IP-PBX using the KX-TDA50 Maintenance Console. The Structure of this Manual This manual contains the following sections: Section 1 System Outline Provides general information on the Hybrid IP-PBX, including the system capacity and specifications. Section 2 Installation Describes t
ملخص المحتوى في الصفحة رقم 11
F.C.C. REQUIREMENTS AND RELEVANT INFORMATION 1. Notification to the Telephone Company This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the side of this equipment is a label that contains, among other information, a product identifier in the following format: US:AAAEQ##TXXXX If requested, this number must be provided to the telephone company. Installation must be performed by a qualified professional installer. If required, provide the teleph
ملخص المحتوى في الصفحة رقم 12
7. Combined Use with Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
ملخص المحتوى في الصفحة رقم 13
For Cell Station CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void user's authority to operate this device. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener
ملخص المحتوى في الصفحة رقم 14
Table of Contents 1 System Outline .....................................................................................17 1.1 System Highlights...........................................................................................................18 1.1.1 System Highlights .............................................................................................................18 1.2 Basic System Construction ................................................................................
ملخص المحتوى في الصفحة رقم 15
2.5.6 MEC Card (KX-TDA5105)................................................................................................. 82 2.5.7 RMT Card (KX-TDA5196)................................................................................................. 84 2.6 Connection of Extensions.............................................................................................. 86 2.6.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable)............................. 86 2.6.2 Parallel
ملخص المحتوى في الصفحة رقم 16
16 Installation Manual
ملخص المحتوى في الصفحة رقم 17
Section 1 System Outline This section provides general information on the Hybrid IP- PBX, including the system capacity and specifications. Installation Manual 17
ملخص المحتوى في الصفحة رقم 18
1.1 System Highlights 1.1 System Highlights 1.1.1 System Highlights Networking Features The Hybrid IP-PBX supports the following private networking features: TIE Line Service PBXs can be connected via a privately leased telephone lines forming a private network. These "TIE lines" provide a cost-effective way to route calls and communications, and are often used to connect corporate offices located in different cities. QSIG Support TIE line service can be used on a private network that implemen
ملخص المحتوى في الصفحة رقم 19
1.1 System Highlights Third Party CTI Applications The Hybrid IP-PBX supports industry standard protocols, allowing third-party CTI applications to be integrated with the Hybrid-IP PBX and its extensions. Voice Mail Features A Voice Processing System (VPS) can be connected to the Hybrid IP-PBX to provide Voice Mail (VM) and Automated Attendant (AA) services. A Panasonic VPS which supports DPT (Digital) Integration can be connected to the Hybrid IP-PBX effortlessly and with minimal setup requi
ملخص المحتوى في الصفحة رقم 20
1.2 Basic System Construction 1.2 Basic System Construction 1.2.1 Main Unit The main unit is equipped with 4 analog CO line ports (one LCOT4 card) and 4 extension ports (Super Hybrid Ports). For system expansion, optional service cards can be installed, and an additional AC adaptor can also be connected. Construction of Main Unit LCOT4 card (installed by default) Front Cover Main Board Cable Cover 20 Installation Manual
