American Standard 1340M Series دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation
Instructions
1340 SERIES
METERING FAUCET
1340M SERIES
SINGLE TAP PUSH BUTTON FAUCET
1340 SERIES FOR COLD AND TEMPERED
PUSH
SUPPLIES
1340M SERIES INCLUDES BELOW DECK
Certified to comply with ANSI A112.18.1M
MIXING VALVE WITH STRAINER
U.S. PATENT NOS.
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these instructions carefully
before you begin.
WARNING: SUPPLY INLET MUST BE F

ملخص المحتوى في الصفحة رقم 2

7 sec. TO OPERATE 4 PUSH - Start 40 sec. + Lever Retaining Ring Stop 10 sec. Automatic minimum Lift off retaining ring then slide out lever horizontally. Press down to start. Cycle time is factory set but can be changed as shown. TO SERVICE 5 TIGHTEN SET SCREWS TO remove HANDLE use a 3/32" ALLEN WRENCH to loosen three set screws in the HANDLE as shown in Figure A. Remove VALVE CARTRIDGE for cleaning or replacement, see in Figure B. VALVE Reassemble in reverse order, Figures C & D. CARTRIDGE TIGH