APC 2200 VA دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide SMT 2200/3000 VA
Optional Replacement PDU
Safety
Adhere to all national and local electrical codes. A certified electrician must perform all
electrical connections.
1. Disconnect equipment connected to the UPS.
2. Press the OFF button located on the front of the UPS.
3. Disconnect the batteries in the UPS.
4. Disconnect the UPS from utility power.
Installation
Note: The illustrations in this manual may differ slightly in appearance from the actual
hardware.
Remove the five

ملخص المحتوى في الصفحة رقم 2

Locate and snap together the corresponding connectors on the UPS and the replacement PDU panel. Note: The two pin connector will not be utilized with the replacement PDU panel. Secure the replacement PDU panel to the UPS with the screws removed from the factory installed PDU panel. SUA027 SUA029 APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge