Kettler 2533 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

2533 ADIRONDACK BAR STOOL
(1) Short Cross Brace
Contents:
(4) Cross Braces
(1) Seat, (1) Back
(22) 1/4 - 20 x 2” Bolts
(2) Arm Rests
(6) 1/4 - 20 x 2 1/2” Bolts
(2) Front Chair legs
(12) Washers
(2) Back Chair legs
(12) Locknuts
(1) Footrest
Locknut Washer 1/4-20 x 2” Bolt
(2) Side Braces
Tools Required:
7/16” Wrench
#3 Phillips Head Screwdriver
1.
Assembly Instructions
1.
a. With the wing on the post facing front,
align the predrilled holes on front leg to the seat
a. Align predr

ملخص المحتوى في الصفحة رقم 2

Assembly Instructions continued 5. 5. a. Bolt the left and right side braces onto the front legs by aligning the predrilled holes and inserting a 1/4 - 20 x 2 1/2” Bolt. Clean any plastic residue from the bolt then slide a washer on. Screw on the locknut and then 3b. tighten it with the wrench and phillips screwdriver. b. Then align the side braces to the holes on the 3a. back legs, place the short brace across between them aligning with the predrilled holes. Insert the 1/4 - 20 3b.