INSTEON 2448A2 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick-Start Guide


®
Energy Display – INSTEON In-Home Display


Model: 2448A2

Introduction

Energy Display reads power consumption information from

INSTEON meter devices such as iMeter Solo (#2423A1). Also
Status
displays current power use, average energy use per month, and
LED

average cost per-month based on your monthly billing rate.

Set button
Installation

Be sure you have properly installed at least one dual-b and
INSTEON device and an INSTEON meter device. Re

ملخص المحتوى في الصفحة رقم 2

Configuring Energy Display – Setup Modes Button Action To enter Setup Mode, press & hold the Mode/Setup button until the cost setting field begins blinking. Then tap the Mode/Setup button to cycle to the desired settings. Cost Setting Range is 0.1 to 999 cents/kWhr ($9.99/kWhr). Once the counter reaches 999 cents, it will reset to 0.1 cents. The default is 10 cents. Button Action Tap up to increase or down to decrease the cost. If cost is less than 100 cents, cost will change by