ملخص المحتوى في الصفحة رقم 1
Child Restraint/Booster Seat
Owner’s Manual
READ THIS MANUAL
Do not install or use this child restraint until you read and understand the instructions in this manual.
FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
© 2013 Graco PD247333A 5/13 US
ملخص المحتوى في الصفحة رقم 2
Table of Contents 1.0 Warnings to Parents and Other Users 8.0 Choosing an Appropriate Vehicle Seat Location ...............19 ......................4-5 8.1 Vehicle Seat Location 2.0 Registration Information.........6 Requirements............19 2.1 Register Your Child Restraint 6 8.2 Vehicle Seat Belt Requirements 2.2 For Recall Information ......6 ......................20 2.3 If You Need Help ..........7 8.3 SAFE Vehicle Seat Belt Systems ................20
ملخص المحتوى في الصفحة رقم 3
Table of Contents (cont.) 11.0 Securing the Child Restraint in Your 18.0 Securing Child in Vehicle Belt with Shoulder Belt Vehicle .....................36 Positioning Clip ........... 55-58 11.1 Using a Child Restraint WITH a 19.0 Using the Tether..............59 Built-in Harness ..........36 19.1 Storing Lower Anchors and 11.2 With a Vehicle Lap or Tether ..................60 Lap/shoulder belt ...... 36-37 11.3 With LATCH ..........38-39 20.0 Airplane Use ...........
ملخص المحتوى في الصفحة رقم 4
1.0 Warnings to Parents and Other Users NEVER PLACE THIS CHILD RESTRAINT IN A VEHICLE SEATING LOCATION THAT HAS A FRONT AIR BAG. If an air and cause serious injury or death to your child. Refer to your vehicle owner’s manual for information about side air bags and child restraint installation. 4
ملخص المحتوى في الصفحة رقم 5
Failure to properly use this child restraint increases the risk of serious injury or death in a sharp restraint correctly. THE OWNER’S MANUAL and the vehicle owner’s manual. Your child’s safety depends on: 1. Choosing the correct mode of use for the child restraint depending on your child’s size. 2. Inserting the harness straps (if needed) in the proper slots for your child. 3. Selecting a suitable location for the child restraint in your vehicle. 4. Properly routing the vehicle seat b
ملخص المحتوى في الصفحة رقم 6
2.0 Registration Information Model Number: Date of Manufacture: Purchase Date: 2.1 Register Your Child Restrain
ملخص المحتوى في الصفحة رقم 7
2.3 If You Need Help Please contact our Customer Service Department with any questions you may have concerning on a label on the child restraint. USA: 1-800-345-4109 or www.gracobaby.com www.cpsc.gov www.NHTSA.gov www.seatcheck.org 3.0 Useful Information 3.2 Child Restraint Useful Life 3.1 THIS CHILD RESTRAINT STOP using this child restraint and throw it away 10 years after the date of manufacture. Look for this CONFORMS to all applicable sticker on rear of child restr
ملخص المحتوى في الصفحة رقم 8
4.0 Features 8
ملخص المحتوى في الصفحة رقم 9
The locking clip is stored on the back of the child restraint. You will need to use it with certain types of vehicle seat belts. United States Federal Motor Vehicle Safety Standards have installing child restraints in vehicles. The system is called LATCH (Lower Anchorage and Tether for CHildren). LATCH may ONLY be used IN PLACE of vehicle belt if vehicle is equipped with LATCH anchor points. Please refer to vehicle owners manual for LATCH locations in vehicles. 9
ملخص المحتوى في الصفحة رقم 10
5.0 Assembling the Child Restraint Adult assembly required. KEEP GUTTERS CLEAR 1. Lay child restraint flat on back. Grab seat pad fabric in sitting area to expose the gutters . MAKE SURE are clear of the gutters. 2. MAKE sure the harness straps are securely attached within the “T”-shaped slots around the arms as shown . KEEP GUTTERS CLEAR both arms LOCK into the gutters . Harness Strap T-slot A rm 10
ملخص المحتوى في الصفحة رقم 11
3. Arms should CLICK into the gutters. Seat assembly should appear as shown . CLICK! 4. Attach 4 elastic loops from the seat pad under the seat exactly as shown in . 11
ملخص المحتوى في الصفحة رقم 12
5. Pull elastic loop on the seat pad through the vehicle belt guide on side of seat and attach to hook as shown . Repeat on other side. 6. Squeeze height adjust button and push head support into slots on the back support as shown. Head support will click into the back support. You may need to unfasten the hook and loop attachment tape on both sides at the top of the back support to allow for easier access to CLICK! the slots. Always use child restraint with head support installed
ملخص المحتوى في الصفحة رقم 13
7. The assembly is now complete. 13
ملخص المحتوى في الصفحة رقم 14
6.0 WARNINGS DO NOT use locking clip in booster mode. PROTECTION FROM INJURY. proper use of this child restraint reduces the risk of serious injury or death to your child. CHILDREN ARE SAFER WHEN PROPERLY RESTRAINED IN REAR VEHICLE DO NOT INSTALL OR USE THIS CHILD SEATING POSITIONS, RATHER THAN RESTRAINT UNTIL YOU READ AND FRONT SEATING POSITIONS. For a UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’S your vehicle owner’s manual as well as these MANUAL.
ملخص المحتوى في الصفحة رقم 15
NEVER LEAVE A CHILD RESTRAINT NEVER USE CHILD RESTRAINT IF IT HAS UNSECURED IN YOUR VEHICLE. An DAMAGED OR MISSING PARTS. Do not use unsecured child restraint can be thrown around LATCH belt or vehicle seat belt. sudden stop or crash. Remove it or make sure that it is securely belted in the vehicle. If not THE CHILD RESTRAINT CAN BECOME using LATCH and tether, make sure LATCH VERY HOT IF LEFT IN THE SUN. Contact with and tether connectors are properly stored on these parts can bur
ملخص المحتوى في الصفحة رقم 16
7.0 Height and Weight Limitations FAILURE TO USE CHILD RESTRAINT IN A MANNER APPROPRIATE FOR YOUR CHILD’S SIZE MAY INCREASE THE RISK OF SERIOUS INJURY OR DEATH. Instructions for the use of this child restraint differ greatly depending on the size of your child. Be sure you are using the child restraint in the correct mode and with the correct features for your child. 7.1 WITH Built-In Harness Your child must meet all requirements: BELOW top harness slots. is too large for built-in
ملخص المحتوى في الصفحة رقم 17
7.2 WITHOUT Built-in Harness Your child must meet all requirements: (mass between 13.6 and 45 kg) (96 and 145 cm) in height MUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips. BELOW top of booster seat. large for booster seat. If child is between 30 and 65 lbs and shoulders are below the upper harness slots, we highly recommend use of the built-in harness for as long as possible (up to 65 lbs). 17
ملخص المحتوى في الصفحة رقم 18
7.3 WITHOUT Back Support Your child must meet all requirements: MUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips. ears should be below the top of the vehicle seat cushion / head rest. Your Graco booster seat can be used with or without the back support as long as all requirements are met. 18
ملخص المحتوى في الصفحة رقم 19
8.0 Choosing an Appropriate Vehicle Seat Location 8.1 Vehicle Seat Location Requirements IMPROPER PLACEMENT OF THE CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may not be safe for this child restraint. Some vehicles do not have any seating positions that can be used safely with the child restraint. If you are not sure Children are safer when properly restrained in rear vehicle seating positions. Do not use child restraints on
ملخص المحتوى في الصفحة رقم 20
8.2 Vehicle Seat Belt Requirements MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE CHILD RESTRAINT. THE VEHICLE SEAT BELT MUST BE DESIGNED TO HOLD THE CHILD RESTRAINT TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that 8.3 SAFE Vehicle Seat Belt Systems THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR CHILD RESTRAINT, IF the seat location meets all other requirements of these instructions and those in yo
