Hitachi UX21513 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

LTIP/UX21511, UX21513
®
REPLACEMENT LAMP FOR HITACHI LCD REAR PROJECTION TELEVISION
MODELS 42V515 / 42V710 / 42V715 / 50V500E / 60V500E / 50V500 / 50V500A / 50VX500 / 60VX500 / 60V500A /
50V710 / 50V715 / 60V710 / 60V715
USER INSTRUCTIONS
CAUTION:
.
Do not attempt to remove the lamp immediately after use; doing so can cause serious burns. Prior to removing lamp, switch
off the power supply to the television and wait approximately 60 minutes or more to allow for complete lamp cooling.
.
Avoid to

ملخص المحتوى في الصفحة رقم 2

6. Insert the new lamp unit, paying attention to the 7. Tighten the screws firmly on the new lamp unit, orientation and direction of insertion. Ensure that taking care not to overtighten. the new unit is firmly seated. Note: To avoid shortened lamp life and/or reduced picture quality, do not touch the glass portion of the new lamp. 8. Replace the lamp cover by re-engaging the two 9. Replace the front cover by aligning it on the clips; tighten the screw on the lamp cover. television and push