Havis-Shields Havis TCB Series C-TCB-5 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
C-TCB-5 TELESCOPING COMPUTER BASE
1997-2008 FORD EXPEDITION


TOOLS REQUIRED:
3/16” Allen wrench Power drill w/ 3/8” drill bit
Standard socket set Ratcheting wrench
Torx bit set Open-end wrench set

MATERIAL LIST
KEY# QTY DESCRIPTION PART #
1 1 Pole support assembly CM93071-5W
2 1 Telescoping pole assembly CM93072-3
3 1 Under floor plate with threaded hole CM93132

HARDWARE LIST
KEY# QTY DESCRIPTION PART #
4 1 3/8” x 1” Hex head bol

ملخص المحتوى في الصفحة رقم 2

Always! Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit For product support, visit the Install Instructions Section of our website at http://havis.com/Installation/Installation.html, email technicalsupport@havis.com or call 1-800-524-9900. INSTALLATION: 1. Remove front passenger seat bolts. Loosen, but do not remove