Chauvet ZX-30RG دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Precision Series
ZX-30RG
User Guide
Please read these instructions carefully before use
World-wide Headquarters:
3000 North 29th Ct.
Hollywood, Florida, USA 33020
Tel: +1-954-929-1115 Fax: +1-954-929-5560
www.ChauvetLighting.com

ملخص المحتوى في الصفحة رقم 2

On Front: •Scanning Range Post •Scanning Mirror • Lens On Bottom •Funtion Switch •Fuse Holder •Fan On Back: • Bracket Screws • Cable to Head • Dichroic Filter Holder •Gobo Holder •Lamp Replacement Rear View Cover Front View Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide. Operation Before connecting this unit to the mains

ملخص المحتوى في الصفحة رقم 3

Features Removeable Head -To use the ZX-30RG as a projector, the head may be removed. In order to remove the head, simply unscrew the four screws holding the head bracket to the body of the unit and unplug the connecting cable. Selectable Scanning Range - The ZX-30RG offers the user a choice of 3 scanning ranges (180, 150 or 120 degrees). To select the desired scanning range, simply put the set screw in the hole marked with the range required. Function - The ZX-30RG offers the user a choice

ملخص المحتوى في الصفحة رقم 4

Replacing Fuses If the unit does not function at all when connected to the main power supply i.e. the mechanism does not spin. Then it is highly likely that the fuse has blown. Disconnect from main power supply before attempting to replace either lamps or fuse. In order to replace the fuse, disconnect from the main power supply first, and then unscrew the fuse- holder cover to reveal the fuse. The unit has a label attached which indicates the correct fuse rating and you will also find this lis

ملخص المحتوى في الصفحة رقم 5

Power Connections The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration. Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses. Technical Specifications Power: 110V, 60 Hz or 230V, 50