American Standard Enfield 2-PC Elongated Toilet 2860.334 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

For Enfield Two-Piece Toilet
INSTALLATION
Model 2860.330/.334 Elongated w/Seat
INSTRUCTIONS
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product
is installed properly, please read these instructions carefully before you begin. (Certain installations may require
professional help.) Also be sure your installation conforms to local codes.
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

ملخص المحتوى في الصفحة رقم 2

6 7 8 INSTALLING TANK COVER (with wood trim) 9860.000 COVER RUBBER WASHER WOOD TRIM RUBBER TANK MTG. GASKET BOLTS BOLT CAP BLACK VAPOR BARRIER WASHER CLOSET FLANGE NUT CLOSET BOLT INSTALLATION INSTALL TANK a. Install large rubber gasket over WASHER NUT Place wood trim with hook and threaded outlet on bottom of tank INSTALL TOILET loop strips on tank rim, vapor and lower tank onto bowl so that barrier side down. Hand press in tapered end of gasket fits evenly into a. Position toilet sq

ملخص المحتوى في الصفحة رقم 3

11b 12 ARM TOP REFILL TUBE NIPPLE ADJUSTMENTS a. Adjust water level. Water TANK level should be adjusted to CRITICAL LEVEL LEVER MARK ("C.L.") Fig. 10A level indicated on tank by MUST BE 1" ABOVE "S" CLIP adjusting float cup. OVERFLOW PIPE FLOAT CUP See Step 11 for water level FILL adjustment method VALVE WATER LEVEL b. If bowl fails to siphon, an ADJUSTMENT CLIP adjustment may be LINK required with the lift chain. VALVE Simply remove the bead ADJUSTABLE BODY HEIGHT chain fro

ملخص المحتوى في الصفحة رقم 4

TROUBLESHOOTING 13 IF FILL VALVE SHUTS OFF BUT CONTINUES TO LEAK SLOWLY, repeat Step 13. IF FILL VALVE TURNS OFF AND ON DURING PERIODS OF NON-USE, it is a signal you are wasting water because: • The end of the refill tube is inserted into overflow pipe, below LIFT ARM LIFT ARM water level in tank. Attach refill tube to overflow pipe using "S" FIRST FIRST clip provided. • The drain valve is leaking because it's worn, dirty or misaligned with tank ball or flapper (replace with a new flapper)