Pittsburgh Corning 808 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TORQUE WRENCH
239, 807, 808,
2696, 3293
AssEmbly ANd OpERATiNg iNsTRUCTiONs
Model 239, 1/2” Drive Torque Wrench shown above.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
sAVE THis mANUAl.
© ®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Har

ملخص المحتوى في الصفحة رقم 2

CAUTiON, without sAVE THis mANUAl the safety alert symbol, is used to address Keep this manual for the safety practices not related to warnings and precautions, assembly, operating, inspection, maintenance and personal injury. cleaning procedures. Keep this manual WARNiNg Read all safety and the receipt in a safe and dry place for warnings and instructions. future reference. Failure to follow the warnings and instructions may result in serious impORTANT sAFETy injury. save all

ملخص المحتوى في الصفحة رقم 3

lock spECiFiCATiONs knob model 2696 807 Torque Range 20-200 in-lb 5-80 ft-lb Drive 1/4” 3/8” Length 11” 14-1/4” Accuracy ±4% model 239 808 3293 Torque Range (ft-lb) 20-150 50-300 100-600 Drive 1/2” 3/4” 3/4” Length 18” 33-1/2” 42” Accuracy ±4% 5. Turn the Lock Knob at bottom of the Handle counterclockwise until it stops. UNpACkiNg 6. Turn the handle to set the torque. To set to 55, for example: When unpacking, make sure that the item is intact and undamaged. If any parts are missing or br

ملخص المحتوى في الصفحة رقم 4

7. Retighten Lock Knob by turning it all handle (CW and CCW) several times the way clockwise. to re-lubricate the internal workings. Then, operate at a low torque setting direction several times. This ensures proper switch operation. do not turn knurled handle below the lowest torque setting. 3. Wipe Torque Wrench with a cloth to clean. Do not immerse in any cleaning 8. Set the Direction Switch for clockwise solution. This would damage the or counterclockwise operation. The interna