Craftsman RATCHET WRENCH 875.19934 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Owner's Manual
Model No. 875.199340
3/8-in. Ratchet Wrench
Unpacking
When unpacking this product, carefully
inspect for any damage that may have
occurred during transit. Make sure any
loose fittings, bolts, etc. are tightened
before putting this product into service.
WARNING: Please read and save these safety and operating instructions. Read carefully
before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information

ملخص المحتوى في الصفحة رقم 2

Owner's Manual Model No. 875. f99340 Owner's Manual Model No. 875. f99340 90 PSI Maximum This tool is designed to operate at an air pressure of 90 pounds per square inch _, Features & Benefits Read Operating Instructions ONE YEAR FULL WARRANTY ON gauge pressure (90 PSI) maximum, at the Please become familiar with all the _, Specifications CRAFTSMAN PROFESSIONAL TOOL tool. Use of higher air pressure can, and _, Product Warranty instructions and warnings before _, Compressor Requirements may cause

ملخص المحتوى في الصفحة رقم 3

Owner's Manual Model No. 875. f99340 Owner's Manual Model No. 875. f99340 Disconnect the air tool from air supply Some materials such as adhesives and before changing tools or attachments, tar, contain chemicals whose vapors Use attachments designed for use with servicing and during non-operation. could cause serious injury with Tools which cut, shear, drill, staple, air powered tool. Always examine Do not wear loose fitting clothing, prolonged exposure. Always work in a punch, chisel, etc. are

ملخص المحتوى في الصفحة رقم 4

Owner's Manual Model No. 875.199340 Owner's Manual Model No. 875.199340 be a flexible hose in order to isolate Air Tool Hook Up movement of the compressor. The Craftsman 3/8" Drive Ratchet Wrench Route the initial take-off line (pipe) as is designed to operate on 90 PSIG. Lower straight up the shop wall and as high pressure (below 90 PSI) will reduce as possible. This will help minimize performance of the tool while higher air water leaving the compressor and pressure (over 90 PSI) raises the tr

ملخص المحتوى في الصفحة رقم 5

Owner's Manual Model No. 875. f99340 Owner's Manual Model No. 875. f99340 Exploded View Drawing Lubrication Recommended Lubricants An in-line filter-regulator-lubricator (fig 1) Use air tool oil or any other high grade is recommended as it increases tool life turbine oil containing moisture absorbent, and keeps the tool in sustained operation. rust inhibitors, metal wetting agents and The in-line lubricator should be regularly an EP (extreme pressure) additive. See checked and filled with air to

ملخص المحتوى في الصفحة رقم 6

Owner's Manual Model No. 875. f99340 Owner's Manual Model No. 875.199340 1. Flush the tool with air tool oil, gum Tool runs 1. Grit or gum in tool Ratchet mechanism Ratchet mechanism la. Clean mechanism with air tool oil solvent, or an equal mixture of SAE 10 slow or will slips or will not loosen is dirty lb. Replace worn mechanism motor oil and kerosene. Lubricate the tool not operate. after cleaning. 2. Lubricate the tool according to the 2. No oil in tool lubrication instructions in this manu