NHT HDP-1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

located between the terminal cup and the woofer. Once part “B” is attached to
Thank you for your purchase of the NHT HDP-1 Hybrid Dipole
Fig. 1
the HDP-1, attach the speaker cable to the HDP-1 before proceeding (see
Surround Loudspeakers. Please take a few minutes to read
“Connections”). Once the speaker cable is connected to the HDP-1, mount the
through this Owner’s Manual prior to installing your new speakers.
speaker to the wall by simply sliding part “B” into part “A” (Fig. 3).
The inform

ملخص المحتوى في الصفحة رقم 2

! Maintenance HDP-1 Specifications Your speakers require minimal maintenance under normal use. The cabinet may be cleaned using a damp cloth or a mild, non-abrasive glass cleaner. To clean · System Type: 2-way acoustic suspension, the grille, first remove it from the speaker, then brush lightly with a soft brush or hybrid dipole design use a vacuum on its lowest setting. Do not expose the speaker to direct sunlight, · Driver Complement: 4.5” long-throw woofer, high temperatures, or moisture.