Edelbrock GM LT1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PERFORMER RPM AIR-GAP LT1/LT4 INTAKE MANIFOLDS
For 1992-97 GM LT1 Engines - Catalog #7107
For 1994-95 GM LT4 Engines - Catalog #7109
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,
it is recommended to have the installation comp

ملخص المحتوى في الصفحة رقم 2

INSTALLATION PROCEDURE • INSTALLATION: 1. Transfer all factory hardware and emissions equipment to the Edelbrock intake manifold. 2. Use only recommended intake gaskets set when installing this intake manifold. 2. Fully clean the cylinder head intake flanges and the engine block end seal surfaces. 3. Attach the intake gaskets to the cylinder head. Make sure the guide pins on the gaskest are aligned with the holes in the intake flanges of the cylinder heads. 4. Do not use cork or rubber end seal