ملخص المحتوى في الصفحة رقم 1
lename[E:\SEM_Janet\Revision_HTR- masterpage:Right
100\J9041181_2342683121HTR6100CEL\2342683121\GB01COV_HTR-6100-CEL.fm]
GB01COV_HTR-6100-CEL.book Page 1 Friday, August 27, 2004 4:50 PM
2-342-683-12(1)
Home Theatre
System
Operating Instructions
HTR-6600
HTR-6100
©2004 Sony Corporation
model name1[HTR-6600]
model name2[HTR-6100]
ملخص المحتوى في الصفحة رقم 2
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB02REG_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 2 Friday, August 27, 2004 4:50 PM About This Manual WARNING The instructions in this manual are for model To prevent fire or shock hazard, do not HTR-6600 and HTR-6100. Check your model expose the unit to rain or moisture. number by looking at the lower right corner of the To prevent fire, do not cover the ventilation of the front panel.
ملخص المحتوى في الصفحة رقم 3
lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB01COV_HTR-6100-CELTOC.fm] GB01COV_HTR-6100-CEL.book Page 3 Friday, August 27, 2004 4:50 PM Table of Contents Getting Started Other Operations 1: Check how to hookup your Using the Sleep Timer .......................... 29 components.......................................4 Operations Using the Remote 1a: Connecting components with RM-U700 digital audio output jacks ...........6 1b: Connecting co
ملخص المحتوى في الصفحة رقم 4
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB03CON_HTR-6100-CEL.fm Page 4 Saturday, August 28, 2004 8:40 AM Getting Started 1: Check how to hookup your components Steps 1a through 1b beginning on page 6 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component. After hooking up all your components, p
ملخص المحتوى في الصفحة رقم 5
Getting Started lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 5 Friday, August 27, 2004 4:50 PM Required cords The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to E) (not supplied unless indicated). A Audio cord D Optical digital cord White (L) Red (R) E Coaxial digital cord (supplied) B Audio/video cord Orange Yellow (video) White
ملخص المحتوى في الصفحة رقم 6
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 6 Friday, August 27, 2004 4:50 PM . 1a: Connecting components with digital audio output jacks Hooking up a DVD recorder or satellite tuner For details on the required cords (A–E), see page 5. 1 Connect the audio jacks. Satellite tuner OUTPUT AUDIO OUT OUTPUT L DIGITAL OPTICAL R D A ANTENNA MONITOR OUT AM U OUT OPT IN OPT IN COAX IN AUDIO IN VID
ملخص المحتوى في الصفحة رقم 7
Getting Started lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 7 Friday, August 27, 2004 4:50 PM 2 Connect the video jacks. DVD recorder TV monitor OUTPUT INPUT VIDEO VIDEO C C ANTENNA MONITOR OUT U AM OUT OPT IN OPT IN COAX IN AUDIO IN VIDEO SUB TV/SAT DVD IN WOOFER RL GB 7 model name1[HTR-6600] model name2[HTR-6100] [2-342-683-12(1)] DIGITAL VIDEO DVD
ملخص المحتوى في الصفحة رقم 8
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 8 Friday, August 27, 2004 4:50 PM 1b: Connecting components with only analog audio jacks Hooking up video components If you connect your TV to the MONITOR OUT jack, you can watch the video from the selected input (page 17). For details on the required cords (A–E), see page 5. TV monitor INPUT VIDEO C ANTENNA MONITOR OUT U AM OUT OPT IN OPT IN
ملخص المحتوى في الصفحة رقم 9
Getting Started lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 9 Friday, August 27, 2004 4:50 PM 2: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) AM loop antenna (supplied) ANTENNA MONITOR OUT U AM OUT OPT IN OPT IN COAX IN SUB AUDIO IN VIDEO TV/SAT DVD RL IN WOOFER Notes To prevent noise pickup, keep the AM loop antenna a
ملخص المحتوى في الصفحة رقم 10
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 10 Friday, August 27, 2004 4:50 PM 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel). Example
ملخص المحتوى في الصفحة رقم 11
Getting Started lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 11 Friday, August 27, 2004 4:50 PM Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) Black The connector and the colour tube of the speaker cords are the same colour as the speaker terminal to be connected. Colour tube + Front speaker Front speaker Subwoofer (Right) (Left) INPUT A B A MONITOR FRONT R
ملخص المحتوى في الصفحة رقم 12
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 12 Friday, August 27, 2004 4:50 PM Tips To change the speaker cord Since the sub woofer does not emit highly directional signals, you can place it wherever you want. If you want to change the speaker cord, you can (Except for the front speaker of HTR-6600) For detach the supplied speaker cord from the greater flexibility in the position
ملخص المحتوى في الصفحة رقم 13
Getting Started lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 13 Friday, August 27, 2004 4:50 PM Performing initial setup 4: Connecting the AC operations power cord Before using the receiver for the first time, initialize the receiver by performing the following procedure. Connecting the AC power This procedure can also be used to return cord settings you have made to their factory
ملخص المحتوى في الصفحة رقم 14
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 14 Friday, August 27, 2004 4:50 PM C x DIST. X.X m (Center speaker distance) 5: Setting up the speakers Initial setting: 3.0 m Lets you set the distance from your listening position You can use the SET UP menu to set the to the center speaker. Center speaker distance should distance and location of the speakers connected be set from a dista
ملخص المحتوى في الصفحة رقم 15
Getting Started lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 15 Friday, August 27, 2004 4:50 PM SL SR x PL. XXXX (Surround speaker placement) 6: Setting up the sub Lets you specify the height of your surround speakers woofer for proper implementation of the surround effects of the Cinema Studio EX modes (page 24). Listening to the sub woofer B B 60 POWER LEVEL A A 30 MIN MAX POWER PO
ملخص المحتوى في الصفحة رقم 16
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB03CON_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 16 Friday, August 27, 2004 4:50 PM 7: Adjusting the speaker levels and balance — TEST TONE Adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 Press ?/1 to turn on the receiver. 2 Press TEST TONE. “T. TONE” appears in
ملخص المحتوى في الصفحة رقم 17
Amplifier Operation lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB04BSC_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 17 Friday, August 27, 2004 4:50 PM Listening to FM/AM radio Amplifier Operation You can listen to FM and AM broadcasts Selecting the component through the built-in tuner. Before operation, make sure you have connected the FM and AM 1 Press INPUT SELECTOR on the antennas to the receiver (see page 9). receiver to select t
ملخص المحتوى في الصفحة رقم 18
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB04BSC_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 18 Friday, August 27, 2004 4:50 PM Direct tuning Storing FM stations You can enter the frequency of the station you automatically want directly. — AUTOBETICAL 1 Press TUNER repeatedly to select the FM or AM band. This function lets you store up to 30 FM and FM The last received station is tuned in. RDS stations in alphabetical order without
ملخص المحتوى في الصفحة رقم 19
Amplifier Operation lename[E:\SEM_Janet\Revision_HTR- masterpage:Right 100\J9041181_2342683121HTR6100CEL\2342683121\GB04BSC_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 19 Friday, August 27, 2004 4:50 PM Tuning to preset stations Presetting radio stations 1 Press TUNER repeatedly to select the You can preset up to 30 FM or AM stations. FM or AM band. Then you can easily tune in the stations you The last received station is tuned in. often listen to. 2 Press PRESET/CH/D.SKIP + or PRESET
ملخص المحتوى في الصفحة رقم 20
lename[E:\SEM_Janet\Revision_HTR- masterpage:Left 100\J9041181_2342683121HTR6100CEL\2342683121\GB04BSC_HTR-6100-CEL.fm] GB01COV_HTR-6100-CEL.book Page 20 Friday, August 27, 2004 4:50 PM Notes If there is an emergency announcement by government Using the Radio Data authorities, “ALARM” flashes in the display. When the message consists of 9 characters or more, System (RDS) the message scrolls across the display. If a station does not provide a particular RDS service, This receiver als
