Edelbrock 60-4749 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Edelbrock Header
For 2000-2004 PT Cruiser
Catalog #47490 & #47492
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Header. If you have any questions or problems, please
contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail
us at edelbrock@edelbrock.com. Please fill out and mail your warranty card.
Suggested Tools Needed for Installation:
q Metric wrench set, metric sockets, and ratchet
q S

ملخص المحتوى في الصفحة رقم 2

INSTALLATION INSTRUCTIONS Disassembly Assembly 1. Place the supplied port gasket over the studs (if 1. Raise and support the vehicle on a flat stable surface equipped) on the cylinder head. Install the Edelbrock using the floorjack and proper load rated jackstands. Header on the studs (if equipped) using the provided 2. Disconnect the battery. 8mm bolts, and lock washers on all bolts. Use supplied lock nuts and hardened washers on the studs (if equipped). Tighten all flange bolts and nuts 3.