ملخص المحتوى في الصفحة رقم 1
WP-S1000
Wireless Projector Server
User Manual
Version: 1.0 (November, 2007)
ملخص المحتوى في الصفحة رقم 2
Index 1. PRODUCT INTRODUCTION ............................................................................................. 2 1.1. Product Introduction and Features ........................................................................ 2 1.2. Safety Information ................................................................................................. 4 1.3. Package Contents ................................................................................................. 5 1.4. Fami
ملخص المحتوى في الصفحة رقم 3
1. PRODUCT INTRODUCTION 1.1. Product Introduction and Features Thank you for purchasing this wireless projector server - WP-S1000! This projector server is an user-friendly presentation video server, you can connect this server to video projector or any CRT / LCD monitor with 15-pin D-sub video connector and support XGA resolution (1024 x 768 pixels), and share the projector or CRT / LCD monitor with every computer equipped with wired or wireless network connection. Wired and Wire
ملخص المحتوى في الصفحة رقم 4
It’s also simple to install client software. The WP-S1000 projector server provides user-friendly web interface, and you can access the interface with Microsoft Internet Explorer, FireFox, or any other web browser. You can start software download from the web and get the software installed on your computer within 1 or 2 minutes! The web interface also supports 4 languages (English, Japanese, Traditional Chinese, and Simplified Chinese), to satisfy the needs of different people from differen
ملخص المحتوى في الصفحة رقم 5
1.2. Safety Information Please follow the following safety instructions while you’re using this wireless projector server, or you could damage this projector server and yourself. 1. THIS PROJECTOR SERVER IS NOT A TOY! Keep out of reach of children! 2. Do not place this wireless projector server in high-humid and / or hot environment, like bathroom or kitchen. Please refer to the specification of this wireless projector server to understand the environmental requirements of this wire
ملخص المحتوى في الصفحة رقم 6
1.3. Package Contents Before you unpack the package and continue with installation, please check the contents inside the package. If any item is missing, please return the package to the dealer of purchase. Wireless Projector Server (1 pc) Power Adapter (1 pc) Software USB Flash Disk (2 pcs) Antenna (1 pc) Mounting Bracket (1 pc, with 4 screws) Quick Installation Guide (1 pc) User Manual CD-ROM (1 pc) 5
ملخص المحتوى في الصفحة رقم 7
1.4. Familiar With WP-S1000 Front View These 3 LEDs indicate the system status of WP-S1000 projector server: STATUS DESCRIPTION POWER ON WP-S1000 projector server is powered on OFF WP-S1000 projector server is powered off WLAN ON Wireless LAN function is activated OFF Wireless LAN function is deactivated FLASHING Transferring data via wireless LAN interface LAN ON Wired network is connected OFF Wired network is disconnected FLASHING Transferring data via wired LAN interfac
ملخص المحتوى في الصفحة رقم 8
Back View PWR: Push this button to switch on the WP-S1000 projector server (the ‘POWER’ led at the front panel will lit), push this button again to switch off the projector server. 5V DC: Connects to the power connector of power adapter. WARNING: Only use the power adapter comes with product package, DO NOT replace with other power adapter! VGA: Connects to the video cable of your projector or CRT / LCD monitor (15-pin D-sub connector). AUDIO: Connects to the audio cable of ex
ملخص المحتوى في الصفحة رقم 9
2. INSTALL YOUR WIRELESS PROJECTOR SERVER (WPS) Step 1) Hardware Installation. Step 2) Make software USB Flash (PnS Token) by yourself. Step 3) Software Installation. Choose one of the following: i. Install the software using the USB Flash (Recommended) nd ii. Install the software from the WPS (2 Option) Note: It’s recommended to install the software using the USB flash (Fast and Easier). However we only provide 2 USB flash disks, therefore we provide second option to install the softw
ملخص المحتوى في الصفحة رقم 10
3. Connect the video (VGA) cable of the projector to the video (VGA) port (labeled as ‘VGA’) located at the back of the WPS. 4. Connect the audio cable of external speaker (powered) or audio amplifier to the audio port (labeled as ‘AUDIO’) located at the back of the WPS. (Skip this step if this is not required.) 5. Connect the network cable to the network port (labeled as ‘LAN’) located at the back of the WPS. (Skip this step if you use wireless network connection). 6. Connect the p
ملخص المحتوى في الصفحة رقم 11
The current configuration of this projector server will be displayed at the lower-left corner, they are: SSID: The Service Set Identifier of the wireless interface of this projector server. Server IP: The IP address of this projector server. Channel: The radio channel this projector server is using. WEP: The encryption method of the wireless network of this projector server. Resolution: Current video resolution. Version: The version number of the firmware of this projector server. 10
ملخص المحتوى في الصفحة رقم 12
2.2 ) Make software USB Flash (PnS Token) by yourself **Note: The Software USB flash disk is an option item. We recommend you to build the USB PnS Token from WP-S1000 with your USB flash disk/ pen drive by yourself. Before start making an USB Flash Disk, please follow the instruction on Quick Installation Guide page 7 to 13 “Step 2ii) Software Installation (From the WPS)”. And then, follow the instruction below to build your USB flash disk/pen drive. You’ll need: An USB flash disk/
ملخص المحتوى في الصفحة رقم 13
3. Setup wizard will copy all necessary files to the USB flash disk, please be patient, and do not remove the USB flash disk in this process. When you see this message, the wizard is completed successfully and the USB flash disk is ready to use. Click ‘Finish’ to exit and remove the USB flash disk. 12
ملخص المحتوى في الصفحة رقم 14
2.3 Software Installation (Using the USB Flash) Install the software using the USB Flash Disk. (Please Skip Step 1 to 3 if you’re using wired LAN connection). 1. Right-click on wireless network icon located near the clock (usually located at the bottom-right corner of desktop), and select ‘View Available Wireless Networks’ to launch windows zero configuration utility. 2. Locate a wireless network named ‘WPS’, select it and click ‘Connect’. 13
ملخص المحتوى في الصفحة رقم 15
3. Click ‘Connect Anyway’ when you see this message to continue. 4. Insert the USB flash into the USB port of your computer. The computer will automatically search and locate the USB flash. You can run the Plug and Show software immediately by clicking on Start Plug and Show. 5. It will start searching for the WPS. 14
ملخص المحتوى في الصفحة رقم 16
6. You’ll be prompted to enter Login Code, which is a 4-digit number displayed at the upper-left corner of the WPS. Enter Login Code and click ‘OK’ to connect to the WPS. IP Address of the WPS 7. Once you login successfully to the projector server, you will be connected and the WPS will project your PC screen to the projector automatically. You will find the Presentation Client Software appears in your computer. Presentation Client Software. 8. If you close the Presentati
ملخص المحتوى في الصفحة رقم 17
9. To re-connect to the WPS and re-project your PC screen, follow Step 10-13 below. 10. Click on ‘Start’ > ’My Computer’. 11. A removable storage named ‘PnS Token’ will be appeared in your computer’s drive, double-click on it. 16
ملخص المحتوى في الصفحة رقم 18
12. Then, double-click on ‘WP-S1000’ icon, and it will start searching for the WPS. 17
ملخص المحتوى في الصفحة رقم 19
13. You’ll be prompted to enter Login Code, which is a 4-digit number displayed at the upper-left corner of the WPS. Enter Login Code and click ‘OK’ to connect to the WPS. You will be connected and the WPS will project your PC screen to the projector automatically. NOTE: Login code WILL CHANGE when: a. Projector server rebooted. b. User logged out and when login again. IP Address of the WPS 14. You need to plug-in the USB flash disk into your computer during your presen
ملخص المحتوى في الصفحة رقم 20
2.3 Software Installation (From the WPS) You can install the software from the WPS via wired / wireless LAN connection into your computer. (Please skip Step 1 to 3 if you’re using wired LAN connection): 1. Right-click on wireless network icon located near the clock (usually located at the bottom-right corner of desktop), and select ‘View Available Wireless Networks’ to launch windows zero configuration utility. 2. Locate a wireless network named ‘WPS’, select it and click ‘Connect’
