ملخص المحتوى في الصفحة رقم 1
Visionary
Electriscreen
OWNER’S MANUAL
To the Owner
Installation Instructions
Operating the Screen
Maintenance
VE-1005
TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER .
ملخص المحتوى في الصفحة رقم 2
Printed in U.S.A. ©2003 - 2005 Stewart Filmscreen Corporation Stewart Filmscreen reserves the right to make changes to the product specified in this document. From time to time, this document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at www.stewartfilm.com.
ملخص المحتوى في الصفحة رقم 3
Visionary Electriscreen OWNER’S MANUAL Contents To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Step 1. Hanging the Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Step 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Step 3. Installing the Screen Assembly Into the Case . . . . . . 11 Operating the Screen . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
TO THE OWNER Congratulations on your purchase of the finest optical viewing screen available anywhere in the world! Please take a moment to review this manual, it will help ensure you many years of trouble-free service from your new Stewart Filmscreen product. About your Visionary Electriscreen The Visionary Electriscreen is designed for ease of installation. The case can be installed separately during construction, and the screen assembly is then installed once the construction is completed. T
ملخص المحتوى في الصفحة رقم 5
You will need: Enough ladders for the personnel supporting the screen during the mounting process A level Fasteners appropriate for the surface on which the screen is being mounted (See instructions for the type of mount for recommendations.) A wrench (supplied) Note: This manual refers to “AC” to represent electrical power. Your location may use 120 V, 220 V, or other electrical power. Screen systems are manufactured using the electrical power type specified for the location. Use appropri
ملخص المحتوى في الصفحة رقم 6
STEP 1. HANGING THE CASE Professional mounting techniques should be used. Stewart Filmscreen Corporation cannot be liable for substandard or faulty installations. Follow the instructions for mounting the case first, then install the screen assembly into the case after you make the initial electrical connection to the pigtail. Make sure that you mount the case so that the electrical connection is on the left side (audience left). Removing the screen assembly from the case The unit is shipped wit
ملخص المحتوى في الصفحة رقم 7
STEP 2. ELECTRICAL HOOK-UP Caution Professional techniques need to used when making any electrical connection. A qualified electrician should perform these procedures. Be sure to follow all standard safety procedures for installing electrical devices. Do not disassemble or alter the configuration of the motor or the unit's electrical connections. This may cause injury to you or damage to the product. The electrical connection should be made only to the type of power source indicated on the mark
ملخص المحتوى في الصفحة رقم 8
Installing the high voltage switch control A standard 3-position AC wall switch is supplied. The high-voltage control is connected to standard wall jack that is installed near the unit. The switch alternates directions of screen motion by means of the hot lead, using the 3- position switch. Preparing the connection Before making the electrical connections, you need: An available AC constant power source A 4-conductor romex or motor connector cable Making the connections Figure 4 illustrates
ملخص المحتوى في الصفحة رقم 9
Installing the low-voltage 3-button switch option The optional Stewart Filmscreen low-voltage control allows the use of low- voltage wire to connect to the supplied 3-position 24V momentary wall switch. Preparing the connection Before making the electrical connections, you need: An available AC constant power source A 4-conductor switch hook-up cable (4-conductor bell wire or category 5 cable is typically used for long runs) Cat 5, multi-conductor unshielded, or similar type electronic cabl
ملخص المحتوى في الصفحة رقم 10
Installing the infrared remote control option The optional Stewart Filmscreen infrared remote control allows control of the screens from anywhere in the room. Note: The distance between the hand-held remote control and the receiver can be up to 50 feet / 15 m. It is necessary to have uninterrupted line-of- sight between the remote and the receiver. Preparing the connection Refer to the previous section “Installing the low-voltage 3-button switch option.” Making the connection Figure 6 illustrat
ملخص المحتوى في الصفحة رقم 11
Connecting the Video Interface Control System (VICS) The 12V VICS enables up and down operation of the screen in conjunction with a projector, tuner, VCR, cable box, or switched AC outlet. Preparing the connection Before making the electrical connections, you need: An available AC constant power source A 4-conductor cable (14ga) Making the connection Figure 7 illustrates the connection. 1. Feed the cable with the pigtail back into the screen case through the romex connector. 2. Feed one end
ملخص المحتوى في الصفحة رقم 12
Installing the wireless remote control option The optional Stewart Filmscreen wireless remote control allows control of the screen from anywhere in the room. Once the AC power outlet is installed near the screen, an electrician is not needed to connect the wireless remote receiver module to the power source. Note: The distance between the hand-held remote control and the receiver can be up to 50 feet / 15m. It is not necessary to have uninterrupted line-of- sight between the remote and the rece
ملخص المحتوى في الصفحة رقم 13
STEP 3. INSTALLING THE SCREEN ASSEMBLY INTO THE CASE Follow this procedure to mount the screen assembly in the case. Be sure you have performed the appropriate electrical hookup first. 1. Raise the screen assembly to the previously mounted case. 2. Insert the interlocking modular connector from the screen assembly to the corresponding connector in the case. Refer to Figure 9. 3. Make sure the cable and modular connectors stay inside the electrical box when the screen assembly is inserted into
ملخص المحتوى في الصفحة رقم 14
OPERATING THE SCREEN The method you use to raise and lower the screen depends on the type of switch control device you have selected. When you lower or retract the screen, it will stop at its preset limit. If an obstacle (such as a person or furniture) gets in the path of the screen as it is lowered, you should use the switch control to stop the screen's motion; it will not automatically stop if it hits an obstacle. The motor is designed to be used for short operations such as lowering the scre
ملخص المحتوى في الصفحة رقم 15
ADJUSTING THE SCREEN EXTENSION Caution Improper adjustment of the limit switches can cause irreparable damage to the screen itself, resulting in voiding the factory warranty. The extension and retraction limit switches have been preset at the factory. In general, we advise you to avoid readjusting these switches. In some cases, to enable proper alignment of the displayed image on the screen, you may need to adjust the extension of the screen. If adjustment to the extension is necessary, car
ملخص المحتوى في الصفحة رقم 16
Modifying the extension of the screen You can increase the extension of the screen up to 3" (7.6 cm) past the factory preset stop, or you can decrease the extension by approximately 4-6" (10 - 15 cm) from the factory preset stop. Do not attempt to modify the screen extension beyond these recommended amounts. The limit switches are located on the left side of the screen roller tube inside the case, as shown in Figure 10. To increase the screen's fully extended (screen down) stop position: 1. L
ملخص المحتوى في الصفحة رقم 17
SCREEN CARE AND CLEANING With reasonable care, you may expect many years of trouble-free use of your Stewart projection screen. We encourage you to keep your screen clean. To protect your screen when it is not in use, store it in the fully retracted position. Avoid getting any foreign material on the screen, as cleaning may prove very difficult. It may not be possible to remove scratches, paint, ink, etc. General maintenance The screen surface on your screen is delicate. Special attention to the
ملخص المحتوى في الصفحة رقم 18
TROUBLESHOOTING Refer to the following guidelines if you encounter a difficulty in the operation of your Stewart Filmscreen. Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is not addressed here, call the Stewart Filmscreen Corporation. Problem description Probable cause Action to take Screen won't operate. No AC power available. Check to see if the circuit breaker has switched off. Reset if needed. Che
ملخص المحتوى في الصفحة رقم 19
Problem description Probable cause Action to take Screen continues past bottom White limit switch is out of Readjust the white DOWN limit stop position. adjustment. switch. See pp. 13-14 of this manual. Batten retracts too far into case. Yellow limit switch out of Have a qualified service person adjustment. Failure to correct readjust the yellow UP limit can damage motor and screen. switch. See pp. 13-14 of this manual. Do not use the unit until this problem is resolved. During operat
ملخص المحتوى في الصفحة رقم 20
www.stewartfilm.com 1-800-762-4999 Fax (310) 326-6870
