SVAT Electronics Compact Security System CLEARVU5 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CLEARVU5 QUICK START GUIDE
STEP 1: Camera Installation
Follow these instructions for the installation
of each camera. The 60ft video/power wire
has two connections: one for video out, and
one for power.
1. Screw the mounting bracket into the camera’s
mounting hole, turning it clockwise.
2. Mount the camera in the desired location no
more than 60 feet from the TV/Monitor/VCR
DVR unless you have purchased additional
wiring. You may wall mount or desk mount
these cameras.
3. Adjust cameras

ملخص المحتوى في الصفحة رقم 2

CLEARVU5 QUICK START GUIDE STEP 2: Monitor Installation Diagram A 1. Hold the adjustment head as shown in Diagram A. Remove the wingnut (part 1) by turning it counter-clockwise. Make sure you hold the adjustment head tightly while moving the Diagram B wingnut. 2. Holding the adjustment head on its side as shown in Diagram B, lift part 2 (including the screw) Diagram C 3. Holding parts 3 and 4 securely as shown in Diagram C, connect part 3 and 4 to the top of the mount stand. Diagra