Pelco EH2200 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

C1467M-A (3/00)
EH2200
Indoor Enclosure
®
3500 Pelco Way, IMPORTANT SAFEGUARDS AND WARNINGS
Clovis, CA 93612-5699
Prior to installation and use of this product, the following WARNINGS should be observed.
USA
1. Installation and servicing should only be done by qualified service personnel and conform
In North America & Canada:
to all local codes.
Tel (800) 289-9100
FAX (800) 289-9150
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
International Customers:

ملخص المحتوى في الصفحة رقم 2

BRACKET To install the EH2200 refer to Figure 1 and do the following: TILT TABLE 1. Ensure that the mounting surface is capable of supporting four times the COVER weight of the enclosure, camera and KNOCKOUT-1/2-INCH CONDUIT lens. 2. Remove the cover by loosening the tamper-resistant screw with the enclosed hex key. 3. Remove the tilt table assembly. TAMPER-RESISTANT SCREW 4. Determine the mounting location. Use the mounting bracket as a template and HEX KEY mark the four fastener positions onto

ملخص المحتوى في الصفحة رقم 3

MAINTENANCE Clean the window regularly to help maintain picture clarity. Use a soft cloth and a mild nonabrasive detergent. To order replacement parts, refer to Table A. Table A. Mechanical Parts List Qty Description Part Number 1 Mounting bracket weld assembly EH22001001WA 1 Cover weld assembly EH22001000WA 1 Window EH220010000 1 Button head tamper-proof screw ZH8-32X.500TSS 2 4-40 hex nut ZH4-40NUTSH 2 Flat washer ZH125X312X32S 1Tilt table support leg EH22004003COMP 1Tilt table EH22004004COMP

ملخص المحتوى في الصفحة رقم 4

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or workmanship for a period of one year after the date of shipment. (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information: Exceptions to this warranty are as noted below: 1. Model and serial number 2. Date of shipment, P.O. number