Panasonic Pod9cw دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation
Instructions
Outdoor Domed Housings
POD9C(W)/POD9CF(W)
Manufactured By:
for ®
Before attempting to connect or operate this product,
please read these instructions completely.
81-IN3079
6/8/05

ملخص المحتوى في الصفحة رقم 2

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. CAUTION 2. Retain Instructions - The safety and operating instructions RISk OF should be retained for future reference. ElECTRIC SHOCk! ! 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. CAUTION: TO REDUCE THE RISK OF 4. Follow Instructions - All operating and user instructions should ELEC

ملخص المحتوى في الصفحة رقم 3

ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): INSTALLING PENDANT MOUNT (POD9CW/POD9CFW) Power 24VAC, Class 2 Only 1. This unit includes a 1 1/2" NPT coupling for a standard 1 1/2" ! NPT pipe. The POD9 can be used with other brackets 52 watts at 24 VAC (Heater & Blower) Accessory Power designed with 1 1/2" male pipe threads, such as the Panasonic Heater: 50 watts PWM20G and PWM30G wall mount brackets. Blower: 1.7 watts 13 watts Camera Power (models WV-CS954 & W

ملخص المحتوى في الصفحة رقم 4

HOW TO ASSEMLE b THE CONNECTOR • Strip back the cable jacket approximately 0.1 inch WJ-HD316A WU-CU650 (3 mm) and separate the individual conductors. Wiring Color Code Power and Control Inputs Approx. 0.1" Wire POD9C CONNECTOR A Insert Up CAMERA POWER [13 watts WV-CS954 / WV-CS574] 1 24 VAC Live Black 2 24 VAC Live White Contact 3 Green Green 4 Not Used Prepare the individual c

ملخص المحتوى في الصفحة رقم 5

INSTALLING QUICK RELEASE BRACKET AND PAN/TILT INSTALLATION FOR WV-CS574 UNITIZED CAMERA CAMERA ASSEMBLY (ALL MODELS) 1. Installation for WV-CS574 Unitized Camera. Add additional 1" 1. Open the housing by loosening the (3) screws on the dome spacers (from packet assembly) to the existing spacer already trim ring (Figure 1). Note the arrows and the word "Locked" on installed in housing. Connect he quick release bracket using the side of the housing and trim ring. Rotate the trim ring until t

ملخص المحتوى في الصفحة رقم 6

INSTALLING FIXED CAMERA BRACKET (ALL MODELS) 1. Loosen the two pan adjustment screws and rotate the bracket to NOTE: A 90˚ BNC connector is included in the the desired viewing location. packet to assist in fitting the camera (Figure 6). Pan adjustment screw Pan adjustment screw Figure 6 4. Attach the camera to the bracket using the 1/4-20 hex bolt provided. Make final adjustments and lock down the pan, tilt, and height adjustment screws (Figure 7). Figure 3 IMPORTA

ملخص المحتوى في الصفحة رقم 7

EXPLODED VIEWS OF HOUSING 10 Wall Mount Assembly 9 Item No. Description Part No. 1 Lower Trim Ring RPPOD01 8 2 Tinted Replacement Capsule RCPOD9T Clear Replacement Capsule RCPOD9C 3 Dome Clamping Bracket RPFD703 7 4 24vac Heater RPFD072 5 (12vdc) Blower (Used In 24v Hgs) RPFD080 4 6 6 Camera Bracket RPFD060 Camera Bracket (Fixed Models Only) RPRH708 5 7 Connection PCB RPFD050 (Model POD9CW) Connection PCB (Fixed Models)

ملخص المحتوى في الصفحة رقم 8

Mounting Template R .733 2.132 5.500 1.537 2.981 2.000 3.250 - 8 -