ملخص المحتوى في الصفحة رقم 1
Operating Instructions
LVC-C500
LVC-C503
LVC-C510
LVC-C513
LVC-C530
LVC-C533
LVC-C553
Before installing and using the camera,
please read these instructions thorough-
ly and retain them for later reference.
ملخص المحتوى في الصفحة رقم 2
Warning To prevent fire or shock hazard,do not expose the unit to rain or moisture. CAUTION To avoid electrical shock,do not open the cabinet. Refer servicing to quali- RISK OF ELECTRIC SHOCK fied personnel only. DO NOT OPEN Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. CAUTION:TO REDUCE THE RISK OF Regulatory Notices For U.S.A ELECTRIC SHOCK, DO NOT REMOVE This equipment has been tested and found to comply with the limits for a COVER(OR BACK) NO USER SERVI
ملخص المحتوى في الصفحة رقم 3
Contents and Features Contents Features Contents and Features . . . . . . . . . . . . . . . . . . . . . . . . .3 The power zoom color video camera is designed for use in Cautions for Safe Operation . . . . . . . . . . . . . . . . . . . . . .4 monitoring system. Operating Controls and Their Functions . . . . . . . . . . .5 • High resolution and high sensitivity with a 1/4 inch Power IN / CONTROL / External Key(A/D IN) . . . . .6-14 Exview/HAD/CCD (Charge Coupled Device) MENU DESCRIPTIONS . . . .
ملخص المحتوى في الصفحة رقم 4
Cautions for Safe Operation Power Supply • Close to generators of powerful electromagnetic This camera must always be operated a 12V DC radiation such as radio or TV transmitters. power supply. Care of the unit Handling of the unit • Remove dust or dirt on the surface of the lens Be careful not to spill water or other liquids on the with a blower. unit, or to get combustible or metallic material • Use a dry soft cloth to clean the body. If it is very inside the body. If used with foreign matter
ملخص المحتوى في الصفحة رقم 5
Operating Controls and Their Functions 1. Tripod adapter Model: LVC-C500, LVC-C503, This adapter can also be attached on the bottom of the camera. LVC-C510, LVC-C513 2. Lens mount cap 3. TELE Key 1 When push the TELE KEY, picture is telephoto 2 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Focus Near Key In a manual situation, focus get near. 6. Focus Far Key In a manual situation, focus get far. 7. Menu Key If you want to set up a diverse function, you can push this button. 8. Vi
ملخص المحتوى في الصفحة رقم 6
Power In / Control Model: LVC-C500, LVC-C503, LVC-C510, LVC-C513 You can adjust focus and zoom by a pin terminal on the back side of the camera. 1 6 2 5 3 4 is the color of the cable. (If it is offered) * Adjust voltage from 1 pin and 2 pin 6
ملخص المحتوى في الصفحة رقم 7
External Key (A/D IN) Model: LVC-C500, LVC-C503, LVC-C510, LVC-C513 Schematic diagram of wired remote-control 7
ملخص المحتوى في الصفحة رقم 8
Operating Controls and Their Functions 1. Tripod adapter Model: LVC-C530, LVC-C533 This adapter can also be attached on the bottom of the camera. 2. Lens mount cap 1 3. TELE Key When push the TELE KEY, picture is telephoto 2 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Focus Near Key In a manual situation, focus get near. 6. Focus Far Key In a manual situation, focus get far. 7. Menu Key If you want to set up a diverse function, you can push this button. 8. Video output (S-Video
ملخص المحتوى في الصفحة رقم 9
Power In / Control Model: LVC-C530, LVC-C533 You can adjust focus and zoom by a pin terminal on the back side of the camera. is the color of the cable.(If it is offered) * 9
ملخص المحتوى في الصفحة رقم 10
Power In / Control Model: LVC-C530, LVC-C533 10
ملخص المحتوى في الصفحة رقم 11
External Key (A/D IN) Schematic diagram of wired Model: LVC-C530, LVC-C533 remote-control 11
ملخص المحتوى في الصفحة رقم 12
Operating Controls and Their Functions 1. Tripod adapter Model: LVC-C553 This adapter can also be attached on the bottom of the camera. 2. Lens mount cap 3. TELE Key 1 When push the TELE KEY, picture is telephoto 2 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. Menu Key If you want to set up a diverse function, you can push this button. 6. Control JACK (RJ45) Connect RS-422 interface 7. Focus Far Key In a manual situation, focus get far. 8. Focus Near Key In a manual situation, foc
ملخص المحتوى في الصفحة رقم 13
Connections Model: LVC-C553 Power Connection 1. Remove the insulation on the power cable as illustrated. 12 3 2. Attach the terminal tips. 3. Connect to the 12V DC UL Listed, Class 2 Power Supply only on the camera. 1 2 Connection the monitor 1. To VIDEO OUT 2. To Video input on the monitor 13
ملخص المحتوى في الصفحة رقم 14
Control Remote Control Lines are connected to RJ-45 socket as Model: LVC-C553 shown below. In case of RS-485 INTERFACE (Basic) T+ T- 7T- R- CONTROL 8T+ R+ CONTROL OUT Controller In case of Zoom/Focus DC control Interface(option) 4 ZOOM ZOOM(+Tele, -Wide) 5 COMMON COM PIN 8 PIN 1 6 FOCUS FOCUS(+Near, -Far) Receiver/Controller Voltage Range + Vcom + (+5~15V) - Vcom - (+5~15V) 14
ملخص المحتوى في الصفحة رقم 15
MENU DESCRIPTIONS Using TELE, WIDE, F. NEAR, F. FAR button • TELE and WIDE are used for UP and DOWN. • FOCUS+ and FOCUS- are used for INCREASE and DECREASE the data. 15
ملخص المحتوى في الصفحة رقم 16
CAMERA ID 1. CAMERA ID To connect a large number of camera , It can be assigned to identification number to each camera for camera control easily. (OFF, 0 - 255: total numbers of ID are 256) • It only can be set this function using ID commend. To transfer ID Code of camera , In first byte at PC control. Set the ID number of camera , and then the ID number display continuously. 16
ملخص المحتوى في الصفحة رقم 17
FOCUS MODE SET 2. Focus Set: 2-1. Focus Mode Set This function is for focus mode setting A) Set up “FOCUS SET” in main menu using Tele/Wide key. Select the “FOCUS MODE” in submenu using Tele/Wide key. And then set the mode (Auto, Push auto, or Manual) using Focus key. 2-2. Focus Distance Set This function is for selection of minimum shooting distance. A) Select the “FOCUS DIST” in submenu using Tele/Wide key. B) Set the focus distance mode from 1cm to 5M. (1cm, 10cm, 50cm, 1M, 3M, 5M) using
ملخص المحتوى في الصفحة رقم 18
FOCUS MODE SET 2-4. ZOOM END Set This function is for selection of zoom end position. A) Select the “ZOOM END” in submenu using Tele/Wide key. B) Set the Zoom end mode using Focus key. LVC-C503/C513/C533/C553: from (Zoom Start + 1) to X54 LVC-C500/C510: from (Zoom Start + 1) to X324 2-5. ZOOM SPEED Set This function is for selection of zoom speed. A) Select the “ZOOM SPEED” in submenu using Tele/Wide key. B) Set the Zoom speed, Slow, Middle , Quick using Focus key. 2-6. ZOOM TRACKING MODE Set Th
ملخص المحتوى في الصفحة رقم 19
FOCUS MODE SET 2-7. INITIAL SET If initial mode set to ON, All FOCUS SET function is changed to the factory setting. A) Select the “INITIAL SET” in submenu using Tele/Wide key. B) Set the initial set mode to ON or OFF using Focus key. 2-8. RETURN TO MAIN MENU This function is exit to main menu. A) Select the “RETURN” in submenu using Tele/Wide key. B) Set the return mode using Focus key. 19
ملخص المحتوى في الصفحة رقم 20
AWB SET (Auto White Balance) 3. AWB SET 3-1. WB Mode Set AWB This function is for changing the WB mode. WBC MODE AUTO A) Set up “AWB SET” in main menu using Tele/Wide key. RED ADJUST NOT USE B) Select the “WB MODE” in submenu using Tele/Wide key. BLUE ADJUST NOT USE C) Set the mode Auto, Push auto , Manual, Outdoor, Indoor using INITIAL SET ON RETURN Focus key. *WBC MODE: Use for changing White Balance Mode . 1) AUTO: WB Range 2500°K ~ 9500°K . 2) PUSH AUTO: Set the AWB mode to Push Auto, then W
