ملخص المحتوى في الصفحة رقم 1
ADEMCO VISTA SERIES
VISTA-20P / VISTA-20PSIA
VISTA-15P / VISTA-15PSIA
Security Systems
User Guide
K5309-1V6 12/08 Rev. A
ملخص المحتوى في الصفحة رقم 2
IMPORTANT! PROPER INTRUSION PROTECTION For proper intrusion coverage, sensors should be located at every possible point of entry to a home or commercial premises. This would include any skylights that may be present, and the upper windows in a multi-level building. In addition, we recommend that radio backup be used in a security system so that alarm signals can still be sent to the Central Monitoring Station in the event that the telephone lines are out of order (alarm signals are
ملخص المحتوى في الصفحة رقم 3
Table of Contents System Overview ...................................................................................................................................... 5 Introduction ....................................................................................................................................... 5 System Basics .................................................................................................................................... 5 Using the Voice Message C
ملخص المحتوى في الصفحة رقم 4
Table of Contents (continued) Macro Key Programming & Usage ........................................................................................................ 27 About Macro Keys ........................................................................................................................... 27 Example of Macro Programming ....................................................................................................28 Using a Programmed Macro Key........................
ملخص المحتوى في الصفحة رقم 5
System Overview Introduction Congratulations on your ownership of a Honeywell Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today. This system provides: • Three forms of protection: burglary, fire* and emergency • At least one keypad which provides control of system and displays system status • Various sensors for perimeter and interior burglary protection • Smoke or combustion detectors* designed to provi
ملخص المحتوى في الصفحة رقم 6
System Overview (cont’d) Zones and Partitions • The system sensing devices have been assigned to various “zones,” which are specific areas of protection (e.g., front door, kitchen window, etc.). • Zone numbers are displayed at the keypad when an alarm or trouble condition occurs on a sensor. • Partitions (VISTA-20P Series) provide two independent areas of protection, with each partition containing a group of zones that can be armed and disarmed without affecting other zones or use
ملخص المحتوى في الصفحة رقم 7
System Overview (cont’d) Function Keys • The “A,” “B,” “C,” and “D” keys can be programmed to perform various functions. • Functions include: activate a panic alarm, arm the system, provide step arming, switch lights on/off, send a message to a pager, display Time/Date, and start a programmed Macro sequence. Paging Feature • If programmed, the system can automatically send certain system condition messages to up to four (VISTA-20P Series) or two (VISTA-15P Series) pagers. • Th
ملخص المحتوى في الصفحة رقم 8
About The Keypads General Information Your keypads allow you to control all system functions and feature the following: • A telephone style (digital) keypad • Liquid Crystal Displays (LCD) that show the nature and location of all occurrences • Built-in sounder that sounds during alarms and troubles. The sounder also "beeps" during certain system functions and also when depressing any of the keys (to acknowledge the key press). • Backlighting of the LCD display windows. Backlighting tur
ملخص المحتوى في الصفحة رقم 9
About The Keypads (cont’d) ARMED ARMED OFF AWAY STAY 1 OFF 2 AWAY 3 STAY 1 2 3 READY 4 MAX 5 TEST 6BYPASS READY 4 MAX 5 TEST 6 BYPASS CODE CHIME CODE CHIME 7 INSTANT 8 9 7 INSTANT 8 9 READY READY 0 # 0 # Standard Fixed-Word Display Keypad Standard Alpha Display Keypad ARMED 1 OFF 2 AWAY 3 STAY RECORD VOLUME PLAY READY 4 MAX 5 TEST 6 BYPASS MESSAGE 7 INSTANT 8 CODE 9 CHIME READY 0 # MIC STATUS VOICE FUNCTION Voice-Capable Alpha Display Keypad – 9 – 6150-00-001-V0
ملخص المحتوى في الصفحة رقم 10
About The Keypads (Cont’d) FIXED-WORD DISPLAY KEYPAD AWAY: All burglary zones, interior and NIGHT NO AC AWAY perimeter, are armed. PHONE TEST BYPASS STAY: Perimeter burglary zones, such as NOT READY ALARM STAY CHIME BAT protected windows and doors, are CHECK INSTANT CANCELED FIRE armed. 6150disp NIGHT-STAY: NIGHT and STAY indicators both FIXED-WORD DISPLAY light when perimeter burglary zones plus pre-selected interior zones (set by the installer) are armed. INST
ملخص المحتوى في الصفحة رقم 11
Functions of the Keypads 1 2 34 20 19 18 5 17 ARMED STAY 6 OFF AWAY 1 2 3 RECORD VOLUME PLAY 7 16 8 READY 4 MAX 5 TEST 6 BYPASS 9 15 MESSAGE 7 INSTANT 8 CODE 9 CHIME READY 0 # MIC 10 STATUS VOICE FUNCTION 14 13 12 11 Voice-capable 2-line Alpha keypad (shown with flip-down front door removed) IMPORTANT! • Match the numerical callouts in the above graphic with the corresponding number on the following pages for a description of usage. When entering codes and commands, sequential k
ملخص المحتوى في الصفحة رقم 12
Functions of the Keypads (cont’d) NOTE: The functions printed directly on the [PLAY] On Voice keypads, used in keys indicate their primary purpose; the conjunction with the FUNCTION and functions printed under some of the keys (shown VOICE keys to play the recorded in brackets under the respective key), indicate message. their alternate or secondary purpose. [ ↑ ↑ ↑ ↑ ] On Voice keypads, used in 1. DISPLAY WINDOW conjunction with the FUNCTION and VOLUME keys to raise the mess
ملخص المحتوى في الصفحة رقم 13
Functions of the Keypads (cont’d) 15. MIC 11. # This key can be used for "Quick On voice keypads, microphone for Arming" of the system without use of a Message Center recordings. security code (if programmed). 16. MESSAGE LED INDICATOR: (RED) [FUNCTION] On Voice keypads, enables On Voice keypads, flashes red when the desired voice or volume function. message waiting or lights red (steady) 12. 0 when in record mode. [VOICE] On Voice keypads, enables the 17.
ملخص المحتوى في الصفحة رقم 14
Entry/Exit Delays Entry Delay Entry Delays give you time to disarm the system when you re-enter through the designated entrance door. There are two entry delays (if programmed). The first is for your primary entrance and the second can be used for a secondary entrance, where a longer delay is required to walk to the keypad to disarm the system. You must disarm the system before the entry delay period ends, or an alarm will occur. The keypad beeps during the entry delay period, reminding
ملخص المحتوى في الصفحة رقم 15
Entry/Exit Delays (cont’d) Exit Alarms Exit Error Conditions Whenever you arm the system, the exit delay begins. If an entry/exit door or interior zone is faulted before exit delay expires and remains faulted (e.g., exit door left open), the system sounds an alarm and starts the entry delay timer. If you disarm the system before the entry delay ends, the alarm sound stops and the message "ALARM CANCELED " or "CA" is displayed on the keypad, along with a zone number indicating the fau
ملخص المحتوى في الصفحة رقم 16
Checking For Open Zones Using the [∗∗] Key to Display and Announce System Status ∗∗ Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed; otherwise the keypad will display a "Not Ready" message. Use the READY key to display all faulted zones, making it easier for you to identify and secure any open zone. 1. Press [✱] (do not enter code first) to display faulted Alpha Display: zones. DISARMED 2. Secure or bypass the zones
ملخص المحتوى في الصفحة رقم 17
Arming the System STAY Mode: Arms Perimeter Only, Entry Delay On • Used when you want to arm the system with persons staying inside (or if you have pets that are moving throughout the premises). • The perimeter sensors are armed, but interior sensors are left disarmed. • Exit delay begins (you can leave through the entry/exit door, if desired). • An alarm sounds if any protected window or non-entry/exit door is opened. • You may otherwise move freely within the premises. • Persons ente
ملخص المحتوى في الصفحة رقم 18
Arming the System (cont’d) Arming Commands Before arming, close all perimeter doors and windows and make sure the Ready to Arm message is displayed. Mode Press these keys… Keypad Confirms By… † • three beeps security code + 3 STAY STAY • armed STAY message displayed • red ARMED indicator lights † • three beeps security code + 3 STAY + 3 STAY NIGHT- • NIGHT-STAY message displayed STAY • red ARMED indicator lights † • three beeps security code + 7 INSTANT INSTANT • arm
ملخص المحتوى في الصفحة رقم 19
Arming the System (cont’d) Single Button Arming The “A”, “B”, “C”, and/or “D” keys on your keypad may have been programmed for single-button arming. Note that while it is not necessary to use a security code for arming (by using the Quick Arm method described previously), a security code must always be used when manually disarming the system. If Single-Button Arming is programmed: • A function key has been assigned to a specific type of arming: STAY mode, NIGHT-STAY mode, AWAY mode, or
ملخص المحتوى في الصفحة رقم 20
(if programmed) Keyswitch Using the Keyswitch Your system may be equipped with a keyswitch for use when arming and disarming. Red and green lights on the keyswitch plate indicate the status of your system as follows: Green Light: Lights when the system is disarmed and ready to be armed (no open zones). If the system is disarmed and the green light is off, it indicates the system is not ready (one or more zones are open). Red Light: Lights or flashes when system is armed in AWAY or STA
