Honeywell 5804BDV دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

K3636V3 9/04 Rev. A


ADEMCO 5804BDV
TWO-WAY WIRELESS KEY with VOICE STATUS
USER GUIDE
About the 5804BDV
The 5804BDV is a four-button remote control for your alarm system. It can send a command to the alarm system, such as to arm or disarm,
as well as receive system status. Two LEDs and a speaker indicate system status. The 5804BDV is typically used for arming, disarming, and
home automation. Check with your installer to understand which functions the buttons have been assigned on you

ملخص المحتوى في الصفحة رقم 2

Low Battery Indication When the unit goes into a Low Battery condition, the yellow LED will not flash when a button is pressed. Change both batteries immediately. To Replace the Batteries 1. Remove the screw from the back case. 2. Remove case back by using the blade of a small screwdriver to pry open. 3. Place batteries as shown on diagram. Use CR2430 or DL2430Lithium batteries only. 4. Close the case by snapping case front and back together. 5. Replace the screw to secure the case