ملخص المحتوى في الصفحة رقم 1
Galaxy
8/18/60/128/500/504/512
User Guide
Honeywell Security
ملخص المحتوى في الصفحة رقم 2
Table of Contents Introduction ------------------------------------------------------------------------------------------vii KEYPAD INFORMATION ---------------------------------------------------------------------------- 1 General ---------------------------------------------------------------------------------------------- 1 Number Keys (0 – 9) ----------------------------------------------------------------------------- 1 View Keys (A and B) ----------------------------------------------------
ملخص المحتوى في الصفحة رقم 3
Quick Menu ---------------------------------------------------------------------------------------- 7 Accessing The Menu ----------------------------------------------------------------------------- 8 Full Menu ------------------------------------------------------------------------------------------- 8 Quick Menu ---------------------------------------------------------------------------------------- 8 Omit Zones (User Level 3 And Above) ---------------------------------------------------- 9 Pu
ملخص المحتوى في الصفحة رقم 4
All --------------------------------------------------------------------------------------------------- 13 Help Message ------------------------------------------------------------------------------------ 13 Walk Test (User Level 5 and Above) ----------------------------------------------------- 14 Purpose -------------------------------------------------------------------------------------------- 14 Selecting Walk Test ----------------------------------------------------------------------------
ملخص المحتوى في الصفحة رقم 5
AVOIDING FALSE ALARMS ---------------------------------------------------------------------- 26 ZONE REFERENCE TABLES---------------------------------------------------------------------- 27 ALARM AND HELP MESSAGES ---------------------------------------------------------------- 28 Other Keypad In Use (Galaxy 8 And 18 Only) --------------------------------------------- 28 Alarm In Progress -------------------------------------------------------------------------------- 28 PA Reset Required -----
ملخص المحتوى في الصفحة رقم 6
INTRODUCTION The Galaxy alarm system is, in fact, a computer which has been designed using the latest software and hardware technology. First and foremost, the Galaxy meets all your security needs. The engineer will program and commission the system to your own exacting requirements. Warning: There are no user serviceable parts inside. Please refer all servicing to a qualified installer. vii
ملخص المحتوى في الصفحة رقم 7
KEYPAD INFORMATION General The Galaxy Alarm system is controlled by Galaxy Mk7 Full Alpha Liquid Crystal Display (LCD) keypads. A maximum of 16 keypads may be connected to the Galaxy 8, 18 and 60 and 128 control panels. A maximum of 32 keypads may be attached to the Galaxy 500, 504 and 512 control panels. GALAXY 504 V4.00 LCD Display 08:58 TUE 22 NOV Number Keys A 1 2 3 View keys B 4 5 6 ent Enter Key 9 7 8 Star Key Escape Key esc 0 # * Hash Key Power LED Number Keys (0 – 9) These keys are us
ملخص المحتوى في الصفحة رقم 8
Enter Key (ent) The ent key accepts and processes entered data. Valid actions are performed and the next option is accessed. Escape Key (esc) The esc key aborts the current option to return to the previous option level. Any option modification made prior to the option being aborted is erased. Successive pressing of the esc key returns the user to the start display (known as the BANNER). The esc key also aborts the setting routine if pressed during the exit time. Hash Key (#) The # key is used t
ملخص المحتوى في الصفحة رقم 9
SETTING THE SYSTEM Before Setting Before setting the system ensure all doors and windows are secured and areas protected by movement detectors are free from obstruction. Entering A Pin - User Level 1-2 As each digit is entered the keypad responds with a bleep and displays a *. When all the digits are entered, press the ent or A > key to start the setting routine. Entering A Pin - User Level 3 - 6 As each digit is entered the keypad responds with a bleep and displa
ملخص المحتوى في الصفحة رقم 10
Sounder During the setting period the sounder emits a continuous tone if all of the zones are closed. If a zone is opened during the setting period, the sounder begins to pulse. The sounder also pulses during the last 25% of the setting time to indicate time running short. Zones Open The exit time will reset should any zones be open or opened during setting. The display will indicate the number of zones open and invite viewing. Closing the zones will restart the exit
ملخص المحتوى في الصفحة رقم 11
MICROMAX SETTING OPTIONS Setting with the MicroMAX Cards The MicroMAX user cards can be used to set the system. This is done by assigning a MAX user card (or fob) with one of the setting options. When the MAX card is held against a MAX module for three seconds, the MAX function is activated. For example, if the MAX function assigned is 13 = Part Set, then activating the card held function results in the system being part set. If a user is assigned group choice, then a keypad will have to be acce
ملخص المحتوى في الصفحة رقم 12
UNSETTING THE SYSTEM Normal Entry Unsetting starts immediately when the FINAL door is opened or an ENTRY zone is activated. The sounder pulses slowly and the user must go directly to the keypad and enter a valid PIN, followed by A>,
ملخص المحتوى في الصفحة رقم 13
MENU OPTIONS There are two menu structures on the Galaxy control panels: Full Menu Only accessed by default by the Manager code on the Galaxy 60, 128, 500, 504 and 512 control panels. Quick Menu A selection of options from the full menu. The quick menu is the default menu access for all user codes (level three and above) as well as the Manager code on the Galaxy 8 and 18 control panels. Full Menu User Level Quick Menu L4 evel 3L5 evel L6 evel Level 0 = Omit 3 1y 0 = Setting2t 0 = Displa3y 0 = Te
ملخص المحتوى في الصفحة رقم 14
Accessing The Menu To access the menu enter a valid code and press the ent key. The Full Menu or Quick Menu is accessed, depending on the user level. Note: 1. If the user does not have group choice, all groups assigned to the user code must be unset. 2. If the user has group choice, at least one group on the system must be unset. 3. If there are no groups, then the system must be unset. Full Menu The Full Menu has a hierarchy of four structures contained within it. Each structure is ac
ملخص المحتوى في الصفحة رقم 15
Omit Zones (User Level 3 And Above) Purpose This option allows the user to omit zones before setting the system. Zones must be eligible for omission otherwise they will not be displayed. " # Note: Zones remain omitted for one set period only. Selecting Omit Zones ! Enter the QUICK MENU. The 0=OMIT ZONES option is displayed. Press the ent key to select this option. $ Viewing Eligible Zones When the Omit Zones option is selected
ملخص المحتوى في الصفحة رقم 16
Atm 1/2/3/4 Zones (512 Only) ATM zones are omitted by entering one of the ten ATM codes (user 188 to user 197). To select this option enter an ATM code followed by the ent key. Use the A> key to scroll through the four ATM zone options (ATM1 to ATM4) and select by pressing the ent key. A preprogrammed ATM delay time will expire before omitting all ATM zones with the selected ATM zone type. The zones will be omitted for the dura
ملخص المحتوى في الصفحة رقم 17
Chime (User Level 3 and Above) Purpose The Chime mode is switched on and off by this option. When the Chime mode is on, any zones that have been programmed by the engineer for chime will activate momentarily when opened. Note: Your system may not require any zones of this type. Selecting Chime Enter the QUICK MENU. Press key 2 followed by the ent key. The display shows the ON/OFF status of the Chime mode. Press the >A key to
ملخص المحتوى في الصفحة رقم 18
Status The current status of the zone is displayed as circuit information, e.g. Open or Closed. This information alternates with function information. Description The zone description, if programmed, is displayed on the bottom line of the display. The descriptor is assembled from alpha-numeric text and describes the zone in detail, e.g. West Office Door. Selecting And Viewing Selecting the Display Zones option displays the first zone address available on the system. O
ملخص المحتوى في الصفحة رقم 19
Additional Information The # key can be used to reveal additional information on some types of events. This information is displayed on the bottom line. The information includes details such as zone descriptors, user levels and which keypad was used. * Printing If a serial printer is connected to the system, a system history can be printed by pressing the * key. The system will print from the event on display unt
ملخص المحتوى في الصفحة رقم 20
Walk Test (User Level 5 and Above) Purpose The Walk Test option provides a method of testing the zones to ensure that they are operating correctly. There are two options available: 1. All zones can be tested 2. Selected zones can be tested In both cases the sounder indicates an open zone. The test is recorded in the log. Wire-free zones also show the received signal strength as a percentage Selecting Walk Test Enter the QUICK
