Heath Zenith SL-5330 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

OPERATION
Mode: On-Time: Works: Day Night
Test 5 Sec x x
Motion Sensor
Auto 1, 5, 20 min. x
Manual Until Dawn* x
Light Control with
* resets to Auto Mode at dawn.
1
Note: When first turned on wait about 1 /2 minutes for
Protective Lamp
the circuitry to calibrate.
TEST
Shields
Put ON-TIME switch on the sensor ON-TIME
bottom to TEST.
Model SL-5330
TEST 1 5 20
Features
• Turns on lighting when motion is detected. AUTO
• Automatically turns lighting off.
ON-TIME
Put the ON-TIME switch in the 1, 5

ملخص المحتوى في الصفحة رقم 2

❒ Twist the junction box wires and fixture wirestogether INSTALLATION as shown. Secure with wire connectors. For easy installation, select an existing light with a wall switch for replacement. Mounting White to Black to 1234567890123456789 1 23456789012345678 9 Strap White 1234567890123456789 Black Rubber Plug Wall Mount Eave Mount For under eave installation, the sensor head must be rotated as shown in the next two steps for proper Mounting operation and to avoid the risk of electrical shock.

ملخص المحتوى في الصفحة رقم 3

T S O O B ❒ Loosen the clamp screw in Clamp TEST AND ADJUSTMENT the sensor ball joint and gen- Screw tly rotate the sensor. ❒ Turn on the circuit breaker and light switch. ❒ Walk through the coverage Ball 1 NOTE: Sensor has a 1 / minute calibration period 2 area noting where you are Joint before it will detect motion.When first turned on when the lights turn on. Move 1 wait 1 / minutes. 2 the sensor head up, down, or sideways to change the cov- ❒ Turn the RANGE control to the mid position and

ملخص المحتوى في الصفحة رقم 4

TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE SYMPTOM POSSIBLE CAUSE Lights will not come 1. Light switch is turned off. Lights stay on 1. A flood lamp is positioned too close to on. 2.Flood light is loose or continuously. the sensor or pointed at nearby ob- burned out. jects that cause heat to trigger the 3. Fuse is blown or circuit breaker is sensor. (Reposition the lamp away turned off. from the sensor or nearby objects). 4. Daylight turn-off is in effect (re- 2. Light Control is pointed towar